GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 8 of 8
  1. #1

    Default RECON smoke roof cab lights

    Hey guys, thought i would share a new mod i got done to my truck today...

    this will be one of the only mods i DID NOT do myself for a change, seeing i didnt have the time nor the sanctity to drill holes in my own roof... enjoy :D but it was a steal! installed by ranch hand for $187.00!!! including the $100 roof light kit.

    Click image for larger version. 

Name:	IMAG0852.jpg 
Views:	311 
Size:	59.9 KB 
ID:	30930Click image for larger version. 

Name:	IMAG0858.jpg 
Views:	285 
Size:	69.6 KB 
ID:	30931

    BTW these are the 07-11 cab lights on my 2000
    Last edited by reggiecab2000; 10-08-2011 at 10:42 PM.
    2000 Chevrolet Silverado

    4.3L V6, 4L60E, 2WD, Single Cab
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)

    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    35W HID Low Beams
    RECON LED smoked roof cab lights
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  2. #2


    They look good man! I have a 08 silverado and have the recon smoked cab roof lights just like that i'm about to install mine here in a week or so!

    2008 Chevy Silverado Ext. Cab Lt Z71 5.3 V8
    7.5 Inch Rough Country Suspension Lift
    RBP Replica Grille Black w Chrome Rivets
    Recon Smoked Cab Roof Lights
    N-Fab Powdercoated Gloss black Cab Length Nerf Steps
    5% Tint over 20% all the way around / 5% Eyebrow Strip
    AVS Smoked Window Visors
    Z71 Stickers Black & Metallic Silver
    Tow Mirrors / Smoked Turn Signals
    XM Satellite Radio Fin / Color Matched
    Interior Plastic Pieces / Color Matched
    Power Acoustic Tweeters
    Painted Bowties / Color Matched
    Painted Door Handles / Color Matched
    Smittybilt Bull Bar / Color Matched
    Custom Rolled Edge Exhaust Tips / Color Matched
    Custom 2.5 Inch Cat Back True Dual Exhaust
    Flowmaster Super 40 Series Dual in / Dual out
    Magnaflow Tru-X Pipe
    K&N Air Filter
    18x9 Rockstars Machined Black
    Center Caps / Color Matched
    33.13.50 Nitto Terra Grapplers
    New Front Wheel Well Liners
    Eagle Eye Black L.E.D. Tailights
    Eagle Eye Black L.E.D. Third Brake Light / Smoked
    Eagle Eye Black L.E.D. Halo Projector Headlights
    Notto HID Kit 10,000k Low beams
    Recon L.E.D. Light Bar
    Buschwacker OE Style Tailgate Cap
    AMI Gloss Black Antenna
    Debadged Chrome Lettering
    Door Molding Removed

  3. #3
    Jr. Engineer
    groceryman's Avatar
    Join Date
    Mar 2009
    Reidsville, North Carolina, United States


    Looks great i have a set i have to get installed to
    [IMG]C:\Documents and Settings\Craig\My Documents\Downloads[/IMG]T Tuff Country Leveling Kit 285/75/16 Mickey Thompson MTZ 16x8 Moto Metal 951 Wheels Tow Mirrors Westin Winch Tray Pioneer Radio Blackout Bowtie Billet Grill Insert Gullwing Toolbox

  4. #4
    TRPLXL2's Avatar
    Join Date
    Jan 2009
    Norwalk, Ohio
    Blog Entries


    The lights look very nice indeed, I need a set for my 2500HD too. It does suck to have to drill five holes in the roof though or 3, depending on what kit you buy.

  5. #5


    Yeah i dont plan on doing it myself my buddy is going to install them for me at his shop. The main concern is you will need to make sure you seal the holes and such with silicone so you want have any leaking!

  6. #6


    Lookin' good. I like the brush guard too. Is it a full bumper replacement or just a bolt on brush guard?
    04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light

  7. #7


    yeah for an $87 install i have no complaints i dropped it off at 9:00 and it was ready by 1:00, it definitely beats the time, effort, and frustration i would have endured doing it myself. well worth it in my opinion..
    and thanks
    it is just a bolt on ranch hand. i have it line-x'ed also

    ---------- Post added 10-10-2011 at 12:11 AM ---------- Previous post was 10-09-2011 at 11:48 PM ----------

    Heres a night shot i took...

  8. #8


    They look good man i'm ready to get mine installed very soon!

Similar Threads

    By Rockstarrchevy81 in forum GM Electrical Tech
    Replies: 8
    Last: 06-15-2012, 01:39 AM
  2. Recon cab lights
    By groceryman in forum Chevy Truck Accessories
    Replies: 11
    Last: 11-04-2011, 10:23 PM
  3. ANZO or RECON Projectors? IPCW or RECON Tail Lights?
    By Fonze in forum Chevy Truck Accessories
    Replies: 17
    Last: 10-11-2011, 09:33 AM
  4. Recon lights anyone??
    By Shorty 71 in forum Chevy Truck Accessories
    Replies: 22
    Last: 07-19-2010, 10:24 AM
  5. Recon lights
    By Burden33 in forum Chevy Truck Accessories
    Replies: 9
    Last: 06-05-2010, 12:54 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts