Results 1 to 10 of 20
10-09-2011, 04:19 PM #1
painting my front grill silverado
So guys im looking at painting my chrome grill white what do you guys think and is there any thing i should know before i start the project.
Last edited by Burden33; 10-10-2011 at 12:27 AM.
Fabtech/Banks Ram Air |Fuel Off Road/ 315/70/17 duratracs |Hyper tech / Spencershids |Color Matched Bowtie |15% Tint on Front Windows|20% Tint on Back Windows
Chevy Ridin' High
"Black rims are as cool as a boner at a swim meet"
10-09-2011, 04:58 PM #2
Sorry but I don't understand your question. You say "backing my chrome grill white". Do you mean painting the grill white? Look at Bathis (I think thats how he spells it) grill. Its all white and I think it looks good.:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
10-09-2011, 05:54 PM #3
x2.....On what STB Above has mentioned, and In looking at the Picture, I see what looks to be a Wiring Connection below the Front Tow Hook on the driver-side, what does and/or that Connection for??
10-09-2011, 06:02 PM #4
10-09-2011, 07:50 PM #5
- Join Date
- Jan 2009
- Norwalk, Ohio
- Blog Entries
X2 Mike, thats an engine block heater, In California you wouldn't one of those lol!
If you do paint it to match make sure you scuff the "chrome" real good, It will flake off if you don't do good prep work. There is an adhesion promoter called Bulldog, they sell it in any paint store and it's made for painting flexible plastics and chrome pieces. It also keeps from getting spider cracks in the clear coat.
10-09-2011, 08:37 PM #6
Just sand good and use etching primer. It will look much better painted. Paint your bowtie black while you're at it.
10-09-2011, 09:20 PM #7
Personally, I like the chrome but to each his own.04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
10-09-2011, 09:37 PM #8
Or you could swap with someone that has a black work truck grill and paint that one.
10-09-2011, 10:27 PM #9
Dont paint it...Have it Dipped in a white carbon fiber!
10-10-2011, 12:32 AM #10
Ya sorry orginal post fixed. You guys are correct it is my block heater since it get down to -50 and below up here in northern canada. I love tge chrome look on my truck it just seem like a lot of chrome to me. Sstoner where is it i get white carbon fiber dip too
By karz4life87 in forum Chevy Truck AccessoriesReplies: 18Last Post: 05-03-2011, 08:00 PM
By 08SierraZ71 in forum Chevy Truck AccessoriesReplies: 17Last Post: 02-14-2010, 08:16 PM
By Schmig in forum Chevy Truck AccessoriesReplies: 2Last Post: 01-07-2010, 05:30 PM
By bnlake in forum Chevy Truck AccessoriesReplies: 16Last Post: 03-13-2009, 12:11 AM
By vncj96 in forum Chevy Truck AccessoriesReplies: 5Last Post: 09-05-2008, 05:45 PM