Results 1 to 1 of 1
10-12-2011, 10:03 AM #1
- Join Date
- Oct 2011
94 6.5 Diesel Suburban injector pump change
I'm helping a friend with this vehicle. and I'm needing to change the IP. The current one is model DS-S5288 I've been doing some reading on line and have gotten myself somewhat confused.
I understand the 5288 has been superseded, but what are my options? I've also read that the EPROM will need changed. Do I need to get a matching EPOM or will any new version for that vehicle work?
Basically my two questions are: What pump is best? and what EPROM should I use?
BTW: I'm a trained, experienced farm equipment mechanic and have changed out many diesel pumps. I just don't know that much about these machines. I did replace the PSD (mounted remotely), filters, the supply pump is working fine, etc. I'm pretty sure the injector pump has failed.
The Suburban's VIN is: 1GNGC26F1RJ389***
Note: I added this later: How do I know what is the correct PSD/FSD for this vehicle? I've been reading online again (dangerous) and I'm wondering if I've got the correct one. There seems to be various models.
Last edited by komputatek; 10-12-2011 at 10:04 PM.
By mespe in forum GM Diesel & DuraMaxReplies: 1Last Post: 07-08-2011, 08:19 PM
By pryormancan in forum GM Diesel & DuraMaxReplies: 0Last Post: 12-12-2010, 12:16 PM
By pryormancan in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 12-12-2010, 12:03 PM
By rockfoot in forum GM Diesel & DuraMaxReplies: 1Last Post: 03-03-2010, 08:04 AM
By hmfdphil in forum GM Diesel & DuraMaxReplies: 0Last Post: 03-27-2008, 06:24 PM