Results 1 to 3 of 3
Thread: wiper motor replacement
10-18-2011, 03:01 PM #1
wiper motor replacement
i bought a new wiper motor for my 1990 K-1500 4x4.
how does the wiper arm attach to the motor ? will i have to remove the valance under the windshield to unhook the arm, or is it all done by just removing the 3 bolts on the firewall ?
10-24-2011, 04:07 PM #2
If I recall, you can remove the mounting bolts and pull the whole thing out far enough to get at the retaining bolt for the crank arm. I'd give it a try. If not, then you'll have to remove the grill at the base of the windshield.
Good Luck and God Bless
10-24-2011, 04:46 PM #3
thanks.. yea, i had to remove the grill valance under the windshield. wasnt too bad.
By Bigbomber in forum Chevy Uplander & GM Minivan ForumReplies: 1Last: 07-18-2011, 06:30 AM
By eagleye in forum Chevy C/K Truck ForumReplies: 3Last: 07-18-2011, 05:29 AM
By silveradojc in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)Replies: 0Last: 11-19-2009, 04:53 PM
By Jay57NJ in forum General Chevy & GM Tech QuestionsReplies: 4Last: 02-04-2008, 03:44 PM
By 95CTburb19 in forum GM PowertrainReplies: 2Last: 12-16-2007, 03:05 PM
Tags for this Thread