Results 1 to 10 of 13
Thread: Custom Bed Liner Recommendation
08-04-2011, 01:43 PM #1
Custom Bed Liner Recommendation
I've been looking for a spray in bed liner for some time now. I got a few extra dollars and figured its about time. I found this company in Houston that does the job for $400 on my LWB truck. Any thoughts or recommendations before i go for it?
2009 Silverado 1500
5.3L / 3.73 G80 / 4spd / 4x4 / LWB/ Ext Cab / HD Tow-Haul
2.25in ReadyLift Level Kit / 3in blocks/ 3500lb HellWig / 265x65x17 Wrangler AT
K&N Filter / AirRaid MIT / MagnaFlow 2.25" Dual Exhaust / HyperTech MaxEnergy
08-04-2011, 02:41 PM #2
I've had Rhino and Line-X and I prefer the Line-X. Been in my truck since new in '05. I use my truck bed (rocks, chainsaws, jacks etc..) You can see on one of my photo albums dents on my wheel wells from rocks. Theres more dents than the pictures shows but the first dents have been there for years and there no peeling. The new Line-X is even better than what I have.:cool:
2005 Chevy Silverado Z71 Crew Cab
6" Skyjacker lift w/Edlebrock dual front remote resoviour shocks, single rear remote. Rancho skid-plate.
17" x 9" M/T Classic Lock Wheels, 35" BFG A/T or M/T tires
4.10 PercisionGears w/factory locker, T/A Performance rear-end cover
Banks CAI intake, ported throttlebody, JBA coated headers, over-sized Magnaflow cats, Magnaflow cat back exhaust, Diablo tuned
B&M aluminum deep transmission pan
Warn brush guard w/Warn 9.5 XP winch, PIAA bulbs, Line-X bedliner, AWS Black tool chest, Extang tonneau cover
Weather Tech floor mats
Cover-Craft seat covers
Dash mat cover
Formula One window tint
One black Lab in rear seat.
08-06-2011, 08:46 PM #3
I'm getting Line-x on Thursday and I'm wondering what the "The new Line-X is even better than what I have. " is? Please explain
08-07-2011, 11:30 AM #4
line-x all the way!2000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
08-07-2011, 02:43 PM #5
The new Line-X doesn't fade and has carbon-fiber in it.
08-07-2011, 02:45 PM #6
I have the Rhino liner in my truck. It was installed by the previous owner and I too have a few dents in my wheel wells and the liner held up fine. For what I use the bed for (hauling scrap metal, furniture, lawn debris, branches, tools, miscellaneous crap etc....) it works great.04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
08-14-2011, 05:59 PM #7
seem to be having an issue posting pictures. I'll try again... Looks like it worked.
They do not texture the application in the wheel wells.
08-15-2011, 04:47 PM #8
- Join Date
- Dec 2008
LINE-X does not have carbon fiber. LINE-X Premium and LINE-X Xtra (contains Kevlar) both are non-fading bedliners.
Rhino does not have anywhere near the strength of LINE-X. Specifically, comparing LINE-X to Rhino Tuff Grip (most popular product), LINE-X has a 31% higher tear strength, a 53% higher tensile strength, and a 45 degree higher temperature tolerance.
Toff it total trash. I can't tell you how many nasty Toff bedliners I've seen.
Faded and stained Toff
This used to be a Toff blue color match.
This one is disintegrating!
Only 36 mils. The thickness of a dime is about 40 mils.
---------- Post added at 04:47 PM ---------- Previous post was at 04:36 PM ----------
Forgot to mention: That Toff website shows a picture of a military vehicle. Well, a company in Texas called Force Protection makes the MRAP vehicle and they do NOT use Toff, they use a LINE-X coating called Paxcon.
Last edited by Scratch; 08-15-2011 at 04:39 PM.
08-15-2011, 04:56 PM #9
line-x is on my list of to-dos for my truck.
2011 GMC Sierra SLE 5.3 Z71 4X4 Stealth Gray Metallic / 2004 Chevy Impala LS 3.8 Cappuccino
Tow mirrors - Diablew Tuned - Flowmaster Regular 40 - Ready Lift 2.5' lift - BFG LT A/T K/Os - Carr Light Wing - TruckLite LED lights - Optima Red Top - 50% Front Window Tint - Line-X bedliner - Airaid MIT - Tekonsha P2 - ARS Billet Grill - Fia custom fit seat covers
08-15-2011, 08:42 PM #10
I havent had my truck bed done, but I have had two sub boxes with Line-X.....when I do the bed it will be Line X.
By willbradfan in forum Chevy Truck AccessoriesReplies: 5Last: 03-10-2010, 08:24 PM
By ccmnova in forum GM PowertrainReplies: 4Last: 09-08-2009, 06:39 PM
By ccmnova in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last: 07-21-2009, 09:34 AM
By EdPDX in forum Wheels & TiresReplies: 16Last: 03-23-2008, 08:47 PM
By Shootem45 in forum GM PowertrainReplies: 3Last: 12-10-2007, 02:46 PM
Tags for this Thread