Results 1 to 8 of 8
Thread: Stock 17in rims
10-27-2011, 05:05 PM #1
Stock 17in rims
Has anyone ever powder coated their stock rims to make them look better? I have the stock 17inch rims and I don't really like them I want to spice them up a bit. I really like the 5 spoke 20inch stock rims but they are just as expensive as aftermarket rims. If you have I would like to see some pictures, help a brother out.Dave V. -- Riverside, California
Owner of --
2008 Chevrolet Silverado 1500 4.8Liter V8 engine 2WD w/Kenwood Double DIN CD/DVD Player
1971 Chevrolet Chevelle 350ci V8 engine with 500+ horsepower (Still Under Construction)
10-27-2011, 05:11 PM #2
Dave......below is a Link that Steve posted just a little bit ago......they are the Silverado 20in" Alloy Rims for a Excellent Price......are these the ones your asking about??......they're the same that I have on my Truck,
5.3 l 3.73 l G80
BLACK BEAR CUSTOM TUNE
SNUGTOP l COLORMATCH l KATZKIN
10-27-2011, 05:15 PM #3
Thanks Heartbeat, those are the rims I was talking about. I love the way they look, I think they are better than the chrome ones.
10-27-2011, 05:18 PM #4
10-28-2011, 07:03 AM #5
As to Powder Coating rim's I have a set of CenterLine's that were polished and I let them go last winter and didn't clean them enough. Anyway it pitted and ruined them. I have checked with 2 places about coating them and they wanted 90.00/120.00 each for 2 coat's color and clear.
Have any of you checked on pricing to have this done and if so what was the price. I tried sanding and bead blasting but it always comes back when sanded and polished. I can't afford to do the powder coating so I guess I will sand, primer and paint them with Duplicolor paint and clear. These wheels are billitt and rated at 3200 lbs each and retailed for about 400.00 each to my door so I can't just throw or give them away. Has anyone painted wheels before and have any tip's. Thank's and didn't mean to thread jack!!!!
10-28-2011, 02:23 PM #6
No need to worry about thread jacking, I am glad to hear that you have checked about the powder coating. That does seem little too pricey for me as well.
10-28-2011, 02:53 PM #7
Duplicolor makes wheel paint and it works quite well for rattle can paint. My buddy used it on his Chevy Cobalt's wheels and my cousin used it for his Jeep Cherokee wheels and they both came out really good for using spray paint. Also, make sure you take the time to prep the work surface well. Prepping using progressively finer grit sandpaper ( start with 400, then 500, 700, 1,000 etc....) and lightly sanding between coats will give you the best results.04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
10-28-2011, 04:45 PM #8
I had the wheels on my old Colorado powdercoated, and the final price was just under $350 for all 4. As for the painting, the paint can hold up well, just do like telo advised and prep em good, otherwise the paint will look awful.
By alabamaxrebel in forum POLLing placeReplies: 24Last: 05-06-2012, 11:12 AM
By Burden33 in forum Wheels & TiresReplies: 23Last: 11-11-2011, 05:25 PM
By ChevyFarmKid in forum General ClassifiedsReplies: 7Last: 08-27-2009, 04:52 PM
By Swatchvy in forum Lifted & Offroad SuspensionReplies: 3Last: 08-11-2009, 02:40 AM
By 383man in forum General ClassifiedsReplies: 3Last: 11-16-2008, 11:39 AM
Tags for this Thread