Results 1 to 2 of 2
Thread: 93 yukon stalls.
11-28-2011, 08:54 PM #1
- Join Date
- Nov 2011
93 yukon stalls.
Im helping a buddy with his yukon. He bought it with a direct port injection setup on it. Harness was all chopped up, so he fixed the harness, put the original style. Throttle body setup on it, and now it stalls when put in gear and dies . What I think the issue is that the direct port injection setup requires 40 to 50 fuel psi,and the tbi only needs like 10 to 13 psi. But I can't find a inline fuel pump, could they have put a high flow intake sending unit.
11-29-2011, 03:07 PM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
I would do an actual fuel pressure test before the filter and see what the pressure is at. Since it sounds like you actually have to little pressure to run the motor. Then go from there.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
By johna20376 in forum Performance & FuelReplies: 2Last Post: 12-06-2011, 03:31 PM
By ColonialRovers in forum GM Diesel & DuraMaxReplies: 8Last Post: 04-29-2010, 01:29 AM
By route66paul in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 02-28-2009, 11:06 AM
By TigerZ in forum Chevy C/K Truck ForumReplies: 2Last Post: 09-02-2008, 03:27 PM
By mcrich in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 5Last Post: 04-09-2007, 10:36 AM