Results 1 to 10 of 12
Thread: HIDs and Fire/Ice Light bar.
11-08-2011, 07:45 PM #1
- Join Date
- Jan 2011
HIDs and Fire/Ice Light bar.
Haven't been around much but I just made a couple additions to the truck so I thought I'd share em with ya'll.
HIDs are Xentec 35w 6000k kits in both Lows and Fogs
Light Bar is a Plasmaglow Fire and Ice bar.
Fog Lights at Night...
Low and Fog Lights...
2009 Silverado LTZ Z71 4x4
ReadyLift 2.25" leveling kit
285/65/18 Nitto Trail Grapps
5%tint all around
Plasmaglow Fire & Ice LED Bar
6000k HID's Low and Fogs
11-08-2011, 10:47 PM #2
Looks very sharp! Who did the burn out in the street?
11-09-2011, 06:20 AM #3
- Join Date
- Jan 2011
My friend in his duramax lol
11-09-2011, 09:37 AM #4
looks nice, thumbs up!
2003 GMC Sierra 1500 SLE 5.3
2.5 ReadyLift Leveling Kit
Low Profile Toolbox
Westin Nerf Steps
11-09-2011, 09:52 AM #5
I hate to be a buzzkill, but it looks like a lot of glare from HIDs placed in a standard lamp assembly. The fogs are ok as they're mostly downward-angled, but there's a reason placement of HID kits into standard lamp assemblies is becoming illegal in many places -- the glare is flat-out unsafe for on-coming drivers ... which is flat-out unsafe for you (they might hit you). It may be cheap. It may even look good. But if it's not safe (for you and others) then you really need to ask yourself if you should be doing it. If someone wrecks and they claim it's glare-induced and you're out of legal specification then you have an UGLY lawsuit on your hands.
With safety in mind, if you need extra light to see deer, opossum, etc. then the safest ways to obtain it are to: a) perform a HID projector retrofit (do not confuse this with installation of a HID kit into a standard projector lamp -- HID projectors are VERY different from standard projectors), b) increase your fog lamps to 65 watts and wire up your fogs to always be on when your low and high beams are on AND wire up your low beams such that they are on when your high beams are on.
The first approach is very pricey. The second approach is about 10 bucks and 20 mins of your time and sheds every bit as much light as HIDs ... without the annoying (and illegal in many places) glare that cheap (i.e. under 200 clams) HID kits (without HID projectors) induce.
Personally, every time I see someone running high-glare HIDS down the road I pray that they drop a ballast, fry a wire, or have a short. I sit high enough on the road in a lifted rig that it doesn't induce glare for me ... but I know it does for others. This puts my safety, the safety of the driver with the HIDs, and the safety of anyone who shares the road with him/her at risk. That's UNCOOL -- no matter how cool someone thinks it looks.
Last edited by SurrealOne; 11-09-2011 at 10:00 AM.
11-09-2011, 02:22 PM #6
Looks good! I've been contemplating the Plasmaglow light bar as well....04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
11-09-2011, 03:49 PM #7
- Join Date
- May 2010
- Blog Entries
All I can say is sick! That light bar is so bad! Does yours have the sequential turn signal feature??
2006 Duramax LBZ
4'' Diamond eye to 6'' tip
16'' ion alloy, 33'' fierce attitudes
Lots of work left to do!
11-09-2011, 05:24 PM #8
11-09-2011, 05:43 PM #9
- Join Date
- Jan 2011
I ordered mine for Realtruck.com. They were and still are on sale:
Fire and Ice (the blinking bar)
$62 for the flexible
$104 for the solid bar
FireStorm (the sequential)
$147 for what I'm assuming is the flexible but it doesn't really say.
11-15-2011, 12:42 PM #10
I have to agree with the opinion stated above. If you're going to have HID's, angle them down more so, and i hope to god you do not drive around with your fog lights and low beams on during the day... That has to be one of my biggest pet peeves. It drives me nuts seeing people driving around down the highway with their fog lights on when it's not even foggy. It's just as bad as having your brights on for the oncoming drivers. So i flash them my fog lights, they freak out and bright me. Some times i just wish i would have enough anger to turn around and just give it to them.
www.youtube.com/ippielb 2002 Chevrolet Silverado 1500 z71 1985 Chevrolet Silverado k10 2006 Chevrolet Silverado 2500hd 6.6l LLY Duramax 6.5" BDS Suspension Lift Edelbrock Carb & Polished Intake Manifold & Valve Covers NAPC Race Transmission & NAPC Built Transfer Case EFI Live Comp Cam and Valvetrain Snow Performance Methanol Injection 35" Toyo Open Country Mud Terrain on 18" Ion Alloy 179's Headman Long Tube Headers and True Dual Exhaust FASS 150gph Titanium Series Pump AirAid Cold Air Intake with K&N Dry Filter & AirAid PowerAid Throttle Body Spacer 2" Suspension Lift 33x12.50r15 Tires EFI Live & AFE Stage 2 Intake Pacesetter Long Tube Headers with Cats Gone True Dual Exhaust FlowPro 3.73 Gears Yukon Grizzly Locker with Mag-Hytec Cover & Traction Bars NGK Iridium Tips & MSD Ignition Plug Wires Baja Spare Tire Holder 33x13.5 Hankook rt03 18" XD Rims Innovate LC-1 Wideband o2 Sensor x2 HID's all around LED taillights and 3rd brake light BDS Dual Steering Stabilizers Pioneer Double-DIN Touchscreen Navigation with Two 10" Subs under rear seat Electric Fan Autometer Pressure, Boost, and Pyro Gauges 4.56 Gears Airlift Air Bag Suspension
By ChevyFan in forum Chevy Trucks For Sale eBayReplies: 0Last: 03-13-2011, 08:40 PM
By ChevyFan in forum Chevy Trucks For Sale eBayReplies: 0Last: 03-12-2011, 08:10 PM
By coombia21 in forum Chevy Truck AccessoriesReplies: 6Last: 08-31-2009, 03:59 PM
By tahoe99 in forum General Chevy & GM Tech QuestionsReplies: 3Last: 05-23-2008, 01:06 PM
By tahoe99 in forum Chevy Truck AccessoriesReplies: 0Last: 05-22-2008, 08:07 PM
Tags for this Thread