Results 1 to 4 of 4
11-11-2011, 11:30 AM #1
Where does this wire Go?Suburban 1990 6.2
Today I found this Wire hanging Loose,it looks as if it is recently Uncoupled.I had a rumage around but couldn't find its mate.It is connected to the large pluce on what I think is the A/C Housing on the Firewall in the Engine bay.
I really hope this is the reason why my Heater Blower Stopped working.Hoping,really Hoping...
11-11-2011, 11:36 AM #2
11-11-2011, 12:13 PM #3
- Join Date
- Feb 2007
- Blog Entries
That would be the exact reason why your blower stopped working. That's the power for the blower. It plugs onto the face of the blower. It's a single pin of 12 volts. The blower is grounded through a separate ground wire. The hood around it is to protect the connector from weather and to insulate it so it doesn't short on anything.Christopher
1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
2005 Saturn ION-2 Stock 265K miles
1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half
There are 10 kinds of people, those who understand binary, and those who dont...
Remember kids, the only difference between screwing around and science is writing it down- Adam Savage
11-12-2011, 05:41 AM #4
Thankyou to you both,I'll get on to fixing that once this hangover subsides.Right now I am acutely aware of why I don't drink alot.
By DigDirt in forum Maintenance & UpkeepReplies: 5Last Post: 01-02-2011, 03:30 PM
By corvairdad in forum GM PowertrainReplies: 5Last Post: 06-17-2010, 08:17 PM
By c-lo777 in forum Audio, Video & Gadget TechReplies: 7Last Post: 04-07-2009, 07:43 PM
By mystikguy in forum Audio, Video & Gadget TechReplies: 5Last Post: 03-03-2009, 08:27 PM
By vsatkalmi in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 1Last Post: 07-30-2008, 09:37 AM
Tags for this Thread