Results 1 to 10 of 10
Thread: Halo Projector Headlights
11-16-2011, 12:58 PM #1
- Join Date
- Dec 2004
- Arlington, Texas, United States
- Blog Entries
Halo Projector Headlights
Who's got Halo Projector Headlights? Anyone know much about them and who the parent company for them is? Also, if you have them, how do you like them and how are they working out for you?
10 Chevy Traverse LT AWD
02 Chevy Trailblazer LS (110K+ miles - loaded except for 4WD - WRECKED!)
99 Chevy Cavalier LS (105K+ miles - commuter car)
78 Chevy Suburban Silverado (454, 3/4 ton)
62 GMC 3/4 ton Pickup (350 police interceptor)
Remember: Search Before Posting | Fill out Your Profile & Signature
Follow Us Please: facebook.com/gmtruckclub | twitter.com/gmtruckclub
Support GMTC: Help the site, contribute today
11-16-2011, 03:44 PM #2
I almost bought some ... but then learned that they are -all- HALOGEN projectors. (This means they do nothing good for [and can actually worsen glare caused by] HIDS, as HID projectors are radically different beasts from halogen projectors.) However, like you I am interested in how those who have them use and like them. Thanks for asking!
11-16-2011, 09:57 PM #3
- Join Date
- Apr 2010
- Piermont,NY, back in Northern NJ now, But may be in IL soon....
There are many Co's that make them some good some bad.. As for The cool factor the Halo's do look great and the Anzo's have the brightest
ones on the market. They use CCFL bulbs while other Co's use 1 little bulb and hope the light gets all the way around. As for the Projectors
They say NOT to put HID's in them because of melting I have seen it done but I think people use lower watt ballest...They also can put out a thiner beam But they could have that cutoff that some lights have so you do NOT blind on coming people...
Hope this helps...
Look at Anzo,IPCW,Pilot just to name a few...08 Z71 Avalanche Mods to date: K&N CAI,Hellwig Swaybars and End Links, Corsa Sport Exhaust, Superchips Programer,IPCW LOF & 3rd brake light and tails, AMI Gas door,Show Hooks and Door locks, Enkei Wheels, with Pirelli tires, StreetScene Bowties, Grant Steering wheel,Muth signal mirrors,SSBC Big Brake kit,Huskyliner Mug gards,Floor mats and Hood shield, McGard Lug nuts and locks, Bedrug, Cervini's Ram Air hood,35watt HID Fog lights, Sylvania bulbs all around ZXE's Highs and Lows, WhiteNight Back up lights,Sirius and HD Radio, SnugTop sitting on deck now Got a Softopper on now,Tempress Boat Hatches.... New Bilstein shocks are on... New Mods coming soon..... X
11-16-2011, 11:10 PM #4
Hey Steve...check out my pics I have halo projecters as far as melting as long as you stick with 35watt ballast you'll be fine...55watts will melt it....4.8L Vortec | 6inch Lift | 35'' BFG ALL TERRAINS | K&N Intake | AirRaid Throttle Body Space | 3inch straight pipe dumped at rear axle | BlackBear Tuned | 2 13in JL Audio Subs | 1000watt HD amp, 2.9 cap | Kenwood Dble Din | Gibson Hi Flo Cats | HIDs Hi/Los 55watt 8000k |4.56 gears |
11-18-2011, 06:40 PM #5
I purchased mine from Spyder in California. I think they also provide RECON their projectors. I am running 35watt 8000K HIDs in them. Like mentioned already, 55watt ballast will melt your projectors. So far mine have been great.<br>
They are also CCFL halos.
11-18-2011, 08:43 PM #6
- Join Date
- Jul 2007
- Henderson, NV
- Blog Entries
I did purchase my projectors from RECON. They initially came with halogen bulbs (not too savy about how they'll handle HID's, not too worried about it either as I don't plan on installing the kit), but I changed them out for som xenon bulbs (4,600K). As mentioned above, the RECON projectors only have one LED to light the Halo ring, but in all honesty they look fine on my truck (still been fightin with the weather out here otherwise I'd have some nice night shots). I will say that you're best bet is to go either Anzo or Recon, as they seem to have the most satisfied customers. If you're interested, I do have photo's of the installation and some blog entries about the adventure! Hope that helps, and good luck with your selection!
2010 GMC Sierra 1500 SLE Extended Cab Z71 4X4 5.3L Flex Fuel
MagnaFlow single in duel out system
Volant CAI & Ram Air Scoop with Power Core Filter
Rhino Tuff Grip Spray in Bed liner
Undercover Classic Tonneau
Trail FX Bug "deflector"
AVS Window Deflectors
Black Powder Coated Nerf Bars
RECON L.E.D. Interior, 3rd Cab light, Projector headlights, and Taillights
ATX Crawl Wheels wrapped in BFGoodrich Rugged Terrain tires
CalTrend Neoprene seat covers
2" leveling kit from Max Trac
Diablo Trinity with Diablew Tune
11-18-2011, 08:49 PM #7
I have seen the recon projrctors and I think they are the Spyder projectors but twice the price. I got mine for 250.00 shipped. They have a non CCFL version along with the CCFL version.
11-28-2011, 11:35 PM #8
i got a set off ebay but, i honestly think they are the exact same as spec-D, spyder, ans any other brand for the type i got... mine are the dual halo projectors and all that NO HID thing is the dumbest thing ive ever heard...
HID's run cooler than Halogen, there is NO melting concern for HID, i converted mine to HID but had to trim a little bit from the bowl to fit the HID, now as far as performance of these lights, i see way better visibility in most stock halogen projectors, i honestly think this light output is nothing fantastic at all but i never had a problem with my stock headlights with HIDs and anyone flashing me, i had them aimed right.
but the EXTREME downside of my projectors is the high beam... i had to buy a set of driving lights just to feel safe with these things...
the high beams are horrible and i even upgraded to 120W bulbs and no difference, against a garage you can see the high beams concentrated below the low beam cutoff, and it is the absolute worst light pattern ever. they might as well not be there. on hilly terrain, or mountains i would be stuck going 5 mph so as to see over every hill, honestly i question why i still run them at all, but i think my only reason is because a while back i installed some fogs to complement them, and together i see plenty... honestly my fog beams light up the road better than my projectors... but together theyre decent2000 Chevrolet Silverado
4.3L V6, 4L60E, 2WD, Single Cab
Poweraid TB Spacer
Flowmaster 10-series exhaust (dumped)
Edge CS insight monitor
LS-1 Dual Electric fans
Corvette tranny servo swap
Head Unit: Alpine
Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
Subs: 2-12" Kicker CVT's
Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)
305/70R16 NITTO Terra Grapplers
16" PROCOMP 7089's
2" leveling kit
3" Fabtech Spindle Lift Kit
Front/Rear-Bilstein 5100 shocks
35W HID Low Beams
RECON LED smoked roof cab lights
HELLA LED taillights and 3rd brakelight
HELLA FF-75 Aux. Reverse Lamps
RIGID dually D2, flush mount, wide beam
Hawk HPS Brake pads
Russell braided steel brake lines
Powerstop-red powdercoated brake calipers
Powerslot Cryo brake rotors
EGR in-channel window visors
11-29-2011, 12:07 AM #9
That's a very real risk based on simple physics -- one your dismissal of melting concerns did not acknowledge.
Last edited by SurrealOne; 11-29-2011 at 12:10 AM.
11-29-2011, 12:23 AM #10
yes your absolutely right about the wires melting, i completely agree with you.
im just talking about that little "no HID" sticker on these projectors, when people convert to HID the most common wattages out there are 35W and 50W and most low beam replacements are 35W HID's thats where im basing my assumption i guess you could say...
USUALLY but definitely not always when you convert to HID your not risking any wire melting conditions especially at 35W, but if your talking about going to higher wattage halogen bulbs then yes you definitely need to upgrade the wires, that would be a high risk
Replies: 0Last Post: 08-15-2011, 11:20 PM
Replies: 0Last Post: 04-27-2011, 05:01 AM
Replies: 0Last Post: 02-25-2011, 05:12 AM
By Corins in forum Chevy Truck AccessoriesReplies: 6Last Post: 01-21-2010, 12:21 PM
Tags for this Thread