GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3
  1. #1

    Default 1997 Chevy K1500 Pick Up lower ball joint question

    I have removed the upper ball joint and rotor. I have disconnected the tie rod from spindle and removed axel nut and pulled drive axel out of spindle and removed spindle. I have removed castle nut from lower ball joint stud. I believe the ball joint is original factory bj. While trying to press out the bj it would not come out but did bend my $100 astro pneumatic C clamp so now it won't press straight. I am trying to press the bj out by pressing upwards to remove. Does any one know if this is the correct direction? A couple people said I was supposed to press out by pressing bj downward. Also are there any other clips to remove or anything holding bj in. I was thinking at this point I might put a platform under the lower control arm with a receiving tube around bj stud and between lower control arm and platform and go at it with a 5# sledge till it pops into the tube. Help,/.;m,'/;/.!please send advice or dynamite. thanks

  2. #2

    Default

    The lower ball joint needs to be pressed down out of the control arm.

    97 Chevrolet Suburban K1500 5.7L
    78 GMC High Sierra K1500
    Fat, drunk, and stupid is no way to go thru life.

  3. #3

    Default

    Hey thanks for the advice. Appreciate it. I'll try that today.

Similar Threads

  1. upper and lower ball joint replacement 1997 chevy k1500
    By karroe in forum Chevy C/K Truck Forum
    Replies: 11
    Last: 03-01-2012, 11:58 PM
  2. 2007 Tahoe lower control arm and ball joint
    By JohnS in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)
    Replies: 0
    Last: 11-10-2011, 10:54 PM
  3. 4 Ball Joint Lower Upper Chevy Silverado 1500 2WD 99-04
    By ChevyFan in forum Chevy Parts eBay
    Replies: 0
    Last: 03-25-2010, 06:00 PM
  4. Lower ball joint
    By 97suburban in forum Lifted & Offroad Suspension
    Replies: 0
    Last: 05-31-2009, 07:58 AM
  5. Will this work on my lower k1500 ball joints?
    By maury in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 4
    Last: 05-02-2008, 09:23 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •