Results 1 to 1 of 1
11-23-2011, 10:04 PM #1
Polarity on door lock actuators? (2004 GMC Sierra 1500)
I recently picked up an Autoloc power tailgate lock (http://www.autoloc.com/catalog/Tailg...rra-C&K-series). The instructions for it were useless but I managed to compare it with Pop & Lock's setup and realized the methods would be the same for both (2 wires tied into the driver's side actuator wires) and so I used Pop & Lock's instructions to get the Autoloc unit wired in. This works flawlessly -- locking the doors locks the tailgate as it's supposed to and the same is true when unlocking.
However, my Python alarm is NOT providing enough voltage to reliably lock/unlock the Autoloc tailgate lock. When I press the button on my alarm fob I hear the Autoloc actuator try to engage but it just lacks the necessary oomph, suggesting a lack of voltage. I intend to install a pair of relays to correct for this, but I need to know the polarity of the door lock actuators. Presumably it's negative switch/trigger and this diagram applies: http://www.the12volt.com/relays/relaydiagram48.html
Can anyone confirm?
By RandyAB in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 07-17-2011, 04:37 PM
By The Rock in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 03-23-2010, 04:30 PM
By filmir in forum General Chevy & GM Tech QuestionsReplies: 2Last: 10-02-2009, 12:24 PM
By hihoslva in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last: 07-28-2008, 09:18 PM
By Weekly Reader in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last: 07-21-2008, 09:35 PM
Tags for this Thread