GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 9 of 9

Hybrid View

  1. #1

    Default Help with audio setup for my 1992 gmc sierra single cab

    Im looking at makeing a custom sub box for my 1992 gmc sierra single cab
    I can cut and put the box together but have no clue what the dimensions should be

    Im also not sure what subwoofer to get, I dont want to spend alot on it but I want it to hit hard
    Any advice would be good

  2. #2
    Legend Mean_Green_95's Avatar
    Join Date
    Apr 2009
    Location
    Baton Rouge, Louisiana, United States
    Posts
    1,170

    Default

    Get in there and measure for the demensions. Everyone is gonna give you personal opinions on what sub(s) to get. I'd go online and research reviews and find the best one for you from there.
    2010 Equinox LT
    2.4, 6 speed auto, power lift gate, remote start, bluetooth, xm.

    1995 Cheyenne C1500 ext. cab(my baby, my first truck)
    5.0, 5 speed, Silverado appearance package, power nothing, bucket seats and console Silverado, painted black interior, eBay halo headlights, eBay chrome tails, eBay cai, dual Flowmaster 40's w/no cats, 15x7 American Racing Hopsters, Walmart fog lights, SS mirrors

  3. #3
    Master Mechanic zigger215's Avatar
    Join Date
    Sep 2011
    Location
    Fairbanks, Alaska
    Posts
    551

    Default

    Don't waste your time online. Go to your local audio shops, tell them your music preference, listen to what they have to say and finally, listen to their subs. Pick which one you think sounds best

    The dimensions are subwoofer specific. Sounds like you won't have much room so go for maybe a sealed box using the minimum dimension requirements for the sub you chose.

  4. #4

    Default

    Quote Originally Posted by zigger215 View Post
    Don't waste your time online. Go to your local audio shops, tell them your music preference, listen to what they have to say and finally, listen to their subs. Pick which one you think sounds best

    The dimensions are subwoofer specific. Sounds like you won't have much room so go for maybe a sealed box using the minimum dimension requirements for the sub you chose.
    x2 as there's no substitute for seeing/hearing in person. If you're still unsure after a visit, go to several shops and listen. Once you know what you think you want THEN research your short list online and perhaps order online -- as shops charge an ugly premium that online vendors tend not to. And by the way, Amazon has LOTS of things Crutchfield has ... for less than Crutchfield.

  5. #5

    Default

    Quote Originally Posted by surrealone View Post
    x2 as there's no substitute for seeing/hearing in person. If you're still unsure after a visit, go to several shops and listen. Once you know what you think you want THEN research your short list online and perhaps order online -- as shops charge an ugly premium that online vendors tend not to. And by the way, Amazon has LOTS of things Crutchfield has ... for less than Crutchfield.
    That ugly premium is called overhead. Most online shops dont have the overhead that a local shop has, however, if you dont mind waiting to return something that isnt right and waiting to have it shipped back etc... online shops are a good route.

    Sometimes there is no substitute for good old fashioned local customer service.


    GMTruckClub members receive discounts off our normal rates! PM me for quotes! Check out our Films gallery - updated with over 200 Hydro Dip films!

    If it can be painted - it can be Hydro Dipped!

    Get the Gorilla!

    gorilladip.com

    sales@gorilladip.com

  6. #6

    Default

    Quote Originally Posted by sstoner911 View Post
    That ugly premium is called overhead. Most online shops dont have the overhead that a local shop has, however, if you dont mind waiting to return something that isnt right and waiting to have it shipped back etc... online shops are a good route.

    Sometimes there is no substitute for good old fashioned local customer service.
    True enough. However, the cost of local shop overhead is sick. I saved -thousands- by ordering online and installing things, myself. Also the quality of my work was higher than local shops I've encountered ... as I solder my electrical connections, wrap my electrical bundles, seal holes that I must drill, apply dielectric grease to ground points and battery terminals, am careful not to break things (clips that hold pillar covers in place, etc), and the like.

    I've seen the average shop's approach and it's a hack/slash job in most cases. You do better in the quality of work department with a premium shop ... but you'll pay dearly for it and they are usually backed up in terms of work (meaning you're going to wait to use one). If you do good work and are going to end up waiting in line for a premium shop ... then why not use the premium shop ONLY to listen and help solidify a decision, order online, and do the work yourself? Cheaper, solid work is inarguable. Less filling, tastes great!

  7. #7

    Default

    Quote Originally Posted by surrealone View Post
    True enough. However, the cost of local shop overhead is sick. I saved -thousands- by ordering online and installing things, myself. Also the quality of my work was higher than local shops I've encountered ... as I solder my electrical connections, wrap my electrical bundles, seal holes that I must drill, apply dielectric grease to ground points and battery terminals, am careful not to break things (clips that hold pillar covers in place, etc), and the like.

    I've seen the average shop's approach and it's a hack/slash job in most cases. You do better in the quality of work department with a premium shop ... but you'll pay dearly for it and they are usually backed up in terms of work (meaning you're going to wait to use one). If you do good work and are going to end up waiting in line for a premium shop ... then why not use the premium shop ONLY to listen and help solidify a decision, order online, and do the work yourself? Cheaper, solid work is inarguable. Less filling, tastes great!
    I guess I am lucky to have a local shop that is locally owned and they do a good job on installs. I have had issues with broken clips etc but its easily fixed. The prices on some things are more but not alot. Generally by the time I figure in shipping and the time for me to put it in.... a 50-60 dollars savings isnt worth me ordering it online.

    I can run a amp for 6 months and if I am decide I am not happy with it I can take it back and exchange it getting full credit. Now you dont get that kind of customer service from any online shop and I have yet to see it from the big name shops or box stores!


    GMTruckClub members receive discounts off our normal rates! PM me for quotes! Check out our Films gallery - updated with over 200 Hydro Dip films!

    If it can be painted - it can be Hydro Dipped!

    Get the Gorilla!

    gorilladip.com

    sales@gorilladip.com

  8. #8
    Master Mechanic zigger215's Avatar
    Join Date
    Sep 2011
    Location
    Fairbanks, Alaska
    Posts
    551

    Default

    True on the online shopping but . But if something fails in your system and you bring it to a shop to look at, hey might give you the stink eye when they realize your equipment is from the web. Just keep that in mind . Not all shops may do that though.

  9. #9
    Master Mechanic zigger215's Avatar
    Join Date
    Sep 2011
    Location
    Fairbanks, Alaska
    Posts
    551

    Default

    As a former installer at two different shops I have to sympathize with shoppy purchases! . But surreal, your point isn't lost on me

Similar Threads

  1. Single in and Single out Flowmaster exhaust with stock pipe.
    By Klutch Mclovin in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 7
    Last Post: 09-22-2011, 10:54 PM
  2. 1992 GMC Sierra Project
    By baldana in forum Photo & Video Gallery
    Replies: 3
    Last Post: 05-24-2011, 07:35 AM
  3. 1992 GMC Sierra Project
    By baldana in forum Member Introductions
    Replies: 0
    Last Post: 05-21-2011, 02:39 PM
  4. Advice on installing an audio setup in a '07 Silverado Extended Cab? Parts guide?
    By crewxp in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 7
    Last Post: 10-25-2010, 12:15 AM
  5. New audio setup for my Silverado
    By lexus1299 in forum Audio, Video & Gadget Tech
    Replies: 10
    Last Post: 05-05-2010, 11:06 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •