GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default 93 yukon stalls.

    Im helping a buddy with his yukon. He bought it with a direct port injection setup on it. Harness was all chopped up, so he fixed the harness, put the original style. Throttle body setup on it, and now it stalls when put in gear and dies . What I think the issue is that the direct port injection setup requires 40 to 50 fuel psi,and the tbi only needs like 10 to 13 psi. But I can't find a inline fuel pump, could they have put a high flow intake sending unit.

  2. #2
    murdog94's Avatar
    Join Date
    Feb 2008
    Cloquet, Minnesota, United States
    Blog Entries


    I would do an actual fuel pressure test before the filter and see what the pressure is at. Since it sounds like you actually have to little pressure to run the motor. Then go from there.


    1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).

    2009 Saturn Aura XE (wifes car)

    2011 F-150 Crew 4X4

    "Hold it to the floor till you see God.... Then Brake!!!!"

Similar Threads

  1. 87 4.3 TBI stalls occiansionally
    By johna20376 in forum Performance & Fuel
    Replies: 2
    Last: 12-06-2011, 02:31 PM
  2. Stalls during idle
    By ColonialRovers in forum GM Diesel & DuraMax
    Replies: 8
    Last: 04-29-2010, 12:29 AM
  3. Stalls on low fuel
    By route66paul in forum General Chevy & GM Tech Questions
    Replies: 3
    Last: 02-28-2009, 10:06 AM
  4. TBI starts then stalls, gas held slowly stalls
    By TigerZ in forum Chevy C/K Truck Forum
    Replies: 2
    Last: 09-02-2008, 02:27 PM
  5. Starts but Stalls out
    By mcrich in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 5
    Last: 04-09-2007, 09:36 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts