Results 11 to 12 of 12
Thread: cheap powerfor 4.3l v6?
12-02-2011, 01:54 PM #11
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
The sway bar part will be easy since your A Arms already have the mounts and the holes should already be in the frame.. so get one from a donor truck and mount it up...
As to the motor.. Yes you will need one from a 1988-1992 for it to work properly. But everything will still be the same. one thing that you will need that i did forget is the Radiator shroud is smaller on the V-8 models so score one of those as well.Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
12-02-2011, 06:04 PM #12
- Join Date
- Nov 2011
I figured id go with dual electric fans while im at it.
What is a cam that i can put in without the computer throwing a code? I was thinking either an xfi268
Ir xe262. A cam like that with votte heads and a decent tune shiuld make 280-300 hp with a tbi intake.
By Steve in forum Chevy Trucks For Sale eBayReplies: 0Last Post: 10-26-2011, 08:10 AM
By 33jt26 in forum The Coffee Shop ~ Chit ChatReplies: 5Last Post: 04-05-2011, 09:53 PM
By 77p20 in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 03-12-2011, 02:33 PM
By Steve in forum Chevy Trucks For Sale eBayReplies: 0Last Post: 05-25-2010, 12:10 PM
By Chaser1 in forum Lifted & Offroad SuspensionReplies: 10Last Post: 03-19-2010, 11:13 AM
Tags for this Thread