GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4

Thread: Help!!!

  1. #1

    Default Help!!!

    I am trying to remove my wiper arms on my 96 sierra and I flip the tab out but they wont pull up! I have tried to grease them and wiggle and pull but nothing seems to work, is there a nut or something else that needs to come off?

  2. #2

    Default

    If there is a nut in there it would be under a plastic cover on the end of the wiper arm where it attaches to the little spindle that moves the arm, you would be able to tell if that cover is there, but on the ones with the little clip we used to pull the clip out as far is it will go, then lift the blade off of the wind shield to releive the pressure on the arm where it attaches, then kind of wiggle the arm, sometimes they come right off, if not you can use a large flat screw driver to gently pry the arm off.
    I hope this helps.
    Terry

  3. #3

    Default

    if it is the clip type then you almost have to pull up on the arm and down on the arm hinge at the same time it can be a pain in the butt

  4. #4

    Default

    Quote Originally Posted by johnb9173 View Post
    if it is the clip type then you almost have to pull up on the arm and down on the arm hinge at the same time it can be a pain in the butt
    This is right, and as you can tell it is way harder to explain/discribe then it is to do.
    Terry

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •