Results 1 to 6 of 6
Thread: I've got a screw loose!
12-20-2011, 04:22 PM #1
I've got a screw loose!
Literally... I started changing my plug wires on my 1999 K1500 today and I noticed that one of the two screws holding on the distributor cap is missing! Maybe that's what keeps throwing the misfire code for cylinder two?!? Any suggestion on a good replacement distributor cap and finding the correct screw for it? Should I just do oem and the dealership service/parts desk?I like you.
12-20-2011, 08:21 PM #2
The new cap should come with screws. Be careful not to over tighten the replacement cap onto the distributor base, The base is plastic and it breaks easy.
1996 GMC Suburban K 1500 "The Love Boat"
Flowmaster catback exhaust
BFG 285/75/16 on stock 16's
K&N with Cold Redneck Air Intake
Monroe Reflex Shocks
A whole bunch of new stuff -with-
more to come
12-20-2011, 08:53 PM #3
- Join Date
- Oct 2011
And the cap will probably have a little "key" on the rim at the bottom so it should only go on one way, be careful of that too, or you could break the cap.
12-21-2011, 01:03 PM #4
12-21-2011, 01:19 PM #5
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
How many miles did you get from the OEM parts? Let that speak for itself.
More than one installer has put things together wrong and done further damage, words like obvious and common sense dont apply as much as they used to.
12-21-2011, 01:38 PM #6
By garumn in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 07-07-2011, 09:28 PM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 04-28-2011, 09:50 PM
By 4wd-burban in forum GM PowertrainReplies: 2Last Post: 10-16-2009, 08:47 AM
By tech2332 in forum General Chevy & GM Tech QuestionsReplies: 6Last Post: 07-04-2009, 07:43 PM
By rs6er in forum Lifted & Offroad SuspensionReplies: 4Last Post: 06-15-2009, 07:44 AM
Tags for this Thread