GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 2 of 2
  1. #1

    Default 03 2500HD Stalling Issue

    I have a 03 2500HD with a 6.0 in it, it has 238k on it. When I come to a stop light, it wants to stall, but if i put it in neutral, it is fine. it is kicking out a couple of lean codes, and a couple mass air flow codes. I have swapped the MAF with one from my 1500 and it is still doing it. Does anyone have any ideas?
    285/75/16 DURATAC'S

  2. #2


    You mean it wants to idle down real low? If so try cleaning the MAF real good with MAF cleaner and clean the intake tube on your throttle body to remove all deposits. Mine had this same issue and once I cleaned that its worked fine ever since.

    2006 Duramax LBZ
    Edge Evo
    4'' Diamond eye to 6'' tip
    16'' ion alloy, 33'' fierce attitudes
    Lots of work left to do!

Similar Threads

  1. Stalling issue ? help please!
    By quicksilver8817 in forum GM Powertrain
    Replies: 5
    Last Post: 01-15-2011, 04:15 PM
  2. 2500HD steering issue
    By wiqidss in forum Lifted & Offroad Suspension
    Replies: 0
    Last Post: 04-16-2010, 12:18 PM
  3. 2500 vs 2500HD suspension lift issue
    By madkat400 in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 4
    Last Post: 04-07-2010, 10:27 AM
  4. 03 2500HD door power issue
    By c357m in forum GM Electrical Tech
    Replies: 1
    Last Post: 01-11-2010, 09:52 PM
  5. 2005-2500HD, 8.1L, 6-spd Clutch Issue
    By jimmieb in forum GM Powertrain
    Replies: 4
    Last Post: 10-02-2008, 06:30 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts