GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 12
  1. #1

    Default Hello From Wisconsin



    Just wanted to introduce myself to the group and say hello from Wisconsin.
    I drive a 99 silverado NBS. 220K! Still going strong.

    I do have an issue that I'm hoping someone here can offer some help with.
    The truck has no power under a load. We've checked backpressure at the 02 Sensor before the converters. That was ok. I've gotten no light lately. I had one a few months ago when the problem first came about. It was a multiple random cylinder misfire. It came once. We cleared it. It's never came up again. This problem started out small and has gotten worse in the past month. MUCH worse. New plugs/wires less than a year ago. Replaced leaking intake gasket year ago. New MAF sensor a year ago. Replaced broken manifold bolt a year ago. It sounds like there is a howl under the truck when you put it under a load and it simply has NO POWER under load either. I hate taking it to a dealer because I'm stubborn, single, and not rich enough to pay the ridiculous price to have it diagnosed. Any suggestions? Has anyone with an older NBS style silverado had to replace injectors? This truck still has the original water pump, starter, and injectors! It leaks or burns NO OIL!! It's paid for, it goes every time I start it, and it's a safe comfortable ride.
    I cant part with it. It just needs a little TLC.

    Thanks in advance.

    C in Wisconsin.

    "There is no word in japanese....for truck."

  2. #2

    Default

    Welcome aboard.

    As far a your power problem a clogged converter might be your problem. Look at the converter when the truck is running and if it is glowing then it’s clogged and needs replacement.

    I will leave any further diagnosis to those more familiar with your year truck.

    Technology is great, when it Works,
    And one Big Pain in the Ass When it Doesn’t.
    Detroit Iron Rules, All the Rest are Just Toys.
    94 GMC Burban, 5.7L (350), 4X4, Auto
    86 GMC Burban, 350, 2 WD, Auto
    79 GMC pickup plow truck, 400, Full time 4X4, Auto
    86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
    See a Pattern yet?

    15 year GM assembly line worker.

  3. #3

    Default

    Never thought of that. I'll put it on my dads hoist and run it for a while to see what it looks like. Thanks!
    Dale Junior #88. A new era in the Earnhardt Legacy.
    GO JUNIOR!! :great:

  4. #4

    Default



    The fuel filter been changed? I've had the same symptoms on our fleet of 99 Savanna's. Pretty cheap fix before you spend big bucks.



    Jamie

    2007 Ford E250(Work van) (Ya, Ya, shut up!)
    1996 GMC Sierra SLE 1500 5.7L/4L60E

  5. #5

    Default

    to the party. good luck with fixing your problem with your truck
    Matt
    1987 GMC Sierra Classic 5.7TBI


  6. #6

    Default

    I'd check the fuel filter and cat first as well.
    No matter where you go...there you are!!
    ----------------------------------------
    Mike

    2004 Chevy Silverado LS Crew Cab
    1988 Ford Bronco (Project 4 Sale)
    2007 Harley-Davidson Sportster 1200C

  7. #7
    Moderator

    Davandy's Avatar
    Join Date
    Jun 2005
    Location
    Haasdonk Belgium
    Posts
    1,550

    Default

    Welcome to the site and good luck with the repair.
    Peter Smet
    Haasdonk, Belgium

  8. #8

    Default

    BTW Where is Wisconsin?

    Sorry little Canadian humour there...

  9. #9
    Legend unplugged's Avatar
    Join Date
    Sep 2006
    Location
    High Deserts of SoCal
    Posts
    2,554

    Talking Under pressure


    Good backpressure before the cat pretty much rules out a clogged cat. You say it doesn't have power under a load? What kind of load? Towing or just accelerating? Does it pull well at low speed, but not on ramp speeds?

    I have experienced a clogged cat and it wouldn't accelerate well with or without towing a load. Putting around town wasn't as noticeable, but merging speeds on a freeway on ramp was when it was most noticeable.

    You mentioned a 'howling' sound under load. Could point to a transmission problem. Smell any burnt almonds?

    btw typical pressure before the cat should be 2-3psi. 4 psi or higher indicates excessive backpressure, which could come from the cat, the muffler or a collapsed exhaust pipe.
    Last edited by unplugged; 10-08-2007 at 01:26 PM.
    There is no way to happiness....happiness is the way.:yipi:
    http://kx6ijq.blu.livefilestore.com/y1pcOFVNH4ix1hjyGUVyXK5LRfef7qSeWzlZDorpQhIEfkZ2ZA  _vXMYypuKMJFw671uF2ZPhjez_j-atRmcjM2zQKpQi1JSsB75/burb1.JPG
    High Desert SoCal
    93 K1500 burb (personal) 350 AT 3" Lift 250K+
    02 Honda Civic LX
    Looking for a 1990's Miata for an engine swap

  10. #10
    Legend unplugged's Avatar
    Join Date
    Sep 2006
    Location
    High Deserts of SoCal
    Posts
    2,554

    Default

    Quote Originally Posted by Cableguy View Post
    BTW Where is Wisconsin?

    Sorry little Canadian humour there...
    Well if we don't know where Wisconsin is we do know that Canada is America's hat:

    Sorry, just a little American humor.

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. New Member in S.E. Wisconsin
    By bparent in forum Member Introductions
    Replies: 9
    Last: 03-31-2010, 10:21 PM
  2. Noob from Wisconsin
    By Griffin1340 in forum Member Introductions
    Replies: 11
    Last: 02-19-2010, 11:23 AM
  3. new in wisconsin
    By hearseman in forum Member Introductions
    Replies: 10
    Last: 03-03-2009, 04:41 PM
  4. Greetings from wisconsin
    By THE STARGAZER in forum Member Introductions
    Replies: 8
    Last: 02-03-2009, 04:12 PM
  5. new guy from wisconsin
    By sniper24 in forum Member Introductions
    Replies: 6
    Last: 09-02-2008, 09:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •