GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 9 of 9

Thread: Ball Joints

Hybrid View

  1. #1

    Default Ball Joints

    Can ball joints squeak when they go bad?



    If at first you don't succeed, chances are, you are using too small of a cheater bar

    Current:
    1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
    Future:
    Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
    US Navy Sailor :sign0011:

  2. #2

    Default

    Yes. When a ball joint is going bad typical signs include a clicking or snapping sound later followed by squeaking at the following times: the end of a stop, when your ride first lurches forward as you mash the gas, and when hitting bumps (basically any up/down motion that causes the ball joint to move substantially from its current position).

  3. #3

    Default

    Certainly, they can also clunk, click, or snap whenever you have movement in the front suspension.

  4. #4

    Default

    So I guess its time to replace them



    If at first you don't succeed, chances are, you are using too small of a cheater bar

    Current:
    1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
    Future:
    Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
    US Navy Sailor :sign0011:

  5. #5
    Sr. Engineer
    Join Date
    Dec 2011
    Location
    11-22-boogie woogie avenue
    Posts
    308

    Default

    How about some grease.

  6. #6

    Default

    Grease nipple is stuck shut and the boot is torn not allowing grease to stay in. Might change them tomorrow. Gotta change that, knock sensors, wheel bearing, door hinge, passenger 3rd door outside handle.



    If at first you don't succeed, chances are, you are using too small of a cheater bar

    Current:
    1999 GMC Sierra SLT Z71 | 5.3 Vortec | Spectre Cold Air Intake | TransDapt TBS | Hypertech 30005 Tune | 2005 Chevy Tails | Denali headlights | AWS Bug Shield | 265/75/16 Mastercraft Courser A/T | "Ghetto" painted tailgate | Boss HD Speakers | 2005 Overhead Console | Dual Thrush Turbo Mufflers
    Future:
    Bigger Amp Alternator | Electric Fans | Oil/Trans Fluid cooler | Re-done exhaust | Paint | Interior Restoration/upgrade with newer model stuff | Window Visors (In channel) | Tint | Low-Profile Tool Box | LEDs throughout stock cab locations | And whatever is spurr of the moment
    US Navy Sailor :sign0011:

Similar Threads

  1. Ball Joints
    By Eaglefixer in forum Lifted & Offroad Suspension
    Replies: 4
    Last Post: 03-15-2010, 10:32 AM
  2. 95 tahoe ball joints
    By bigdaddy77084 in forum General Chevy & GM Tech Questions
    Replies: 11
    Last Post: 01-03-2010, 08:03 PM
  3. ball joints
    By brooklyn718 in forum Chevy Tahoe Forum (GMC Yukon, Cadillac Escalade)
    Replies: 1
    Last Post: 02-21-2009, 09:48 AM
  4. Ball joints
    By Drifter in forum Lifted & Offroad Suspension
    Replies: 0
    Last Post: 10-07-2008, 04:55 PM
  5. Ball Joints
    By cao88c in forum Lifted & Offroad Suspension
    Replies: 3
    Last Post: 05-21-2008, 12:41 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •