GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5
  1. #1

    Question 2006 silverado 4.8 collapsed lifter

    okay im new to this whole forum thing, so sorry if i break any hidden rules. lol i searched around the forums but found nothing to really backup my suspicions. okay here goes, for the last id say 4 months ive had a ticking noise coming from what sounded like the bell housing. everytime we tried pin pointing the "tick" it sounded lke it was somewhere else again. there was even a recent month like period it just stopped ticking completely. but, this week it came back, and was LOUD. finally pulling out of the driveway it happened. a loud ticking, followed by what sounded like a chain snap. the truck then lost a conciderable amount of power, and had a very noticeable missfire. i drove it maybe 5min longer to my friends body shop, and then today dissasembled the top end of the motor. first clue was one of the rockers had no tension, and the spring was fine. it was the 4th rocker from the front, passenger side. jumping forward, the roller was missing from the lifter, and the part of the lifter housing the roller is gone. now, the piston is undamaged, and the valves are undamaged. everything besides the lifter looks fine. my concern is the cam. from what we could see through the lifter port/hole, it looked undamaged. ive enver dissasembled a motor to this extent or even seen a lifter prior to this... should i be worried about futire cam failure? or should i be ok just replacing the lifter. i'd really hate to pull the cam, cause im short on funds, and recently laid off. but, if failure of the cam is inevidable, i wanna get it out of the way. any suggestions? or anyone else with lifter failure and what they had to replace? thanks in advance for answers! here are some pics of the damaged lifter as well.
    Attached Thumbnails Attached Thumbnails lifter.jpg  
    Crew Cab Curtis

  2. #2

    Default

    I hate to be the one to tell you this, but you need to find that roller and the other metal shards before it finds you looking for a complete rebuild.
    I am a American solder, I am a member of the finest fight force on earth, I am the bump in the night. I will defend the United states of American Against all enemies both foreign and domestic. Repent now all those who would do my nation and it's people harm; For when we come it will be too late.



    2011 GMC Sierra SLE, Z71 with 5.3 l and max tow/haul package

  3. #3
    Legend

    Red Z71 Max's Avatar
    Join Date
    May 2011
    Location
    Myrtle Beach, SC
    Posts
    2,334
    Blog Entries
    1

    Default

    Quote Originally Posted by Kapelusprime View Post
    I hate to be the one to tell you this, but you need to find that roller and the other metal shards before it finds you looking for a complete rebuild.
    X2^^^^^^^^^^

    (Scott) Myrtle Beach, SC
    January 2012 ROTM WINNER
    2011 GMC Sierra Z71 MAX 6.2 L w/ Trailering Package
    Rough Country, XD Rockstars, Nitto Trail Grapplers, N Fab, Lund Genesis, Putco, Gator Grip,
    Flowmaster 40 series, Diablosport InTune, Banks Ram Air CAI,
    WeatherTech, AVS Aeroskin, Tow Mirrors, Upgradeyourauto.com

  4. #4

    Default

    I plan on finding the scrap before starting the engine again, I'm more curious if the cams gonna be alright. I'm putting all new fluids in as well after reassembly too since the radiator fluid went everywhere after unbolting the head.
    Crew Cab Curtis

  5. #5

    Default

    Well its back together, found the scrap in the pan, run in like a champ. Incase anyone was curious.
    Crew Cab Curtis

Similar Threads

  1. Chevy Monte Carlo Silverado Tahoe Valve Lifter 2006-10
    By Steve in forum Chevy Parts eBay
    Replies: 0
    Last Post: 05-25-2010, 04:00 PM
  2. Lifter replace
    By TJ smith in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 6
    Last Post: 05-24-2009, 04:43 PM
  3. First Gen 5.7 Cam/ Lifter Spec Q's
    By Busted Knuckles in forum GM Powertrain
    Replies: 0
    Last Post: 05-07-2009, 12:30 AM
  4. Stuck lifter
    By gmagilla in forum General Chevy & GM Tech Questions
    Replies: 7
    Last Post: 03-16-2009, 03:09 PM
  5. Utility bucket truck collapsed
    By Steve in forum The Coffee Shop ~ Chit Chat
    Replies: 3
    Last Post: 06-01-2007, 07:27 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •