Results 1 to 3 of 3
Thread: looking at a rear end swap
01-04-2012, 04:17 PM #1
- Join Date
- Jul 2009
looking at a rear end swap
I posted about this before but this time im gonna try and be detailed,
i hate my one wheel wonder 1995 c1500 and know its possible to swap to a posi rear
my questions are:
which is a good donor vechicle
what are the important steps
what are the important parts i need to complete the project
01-04-2012, 06:07 PM #2
I would say that the closer you can get to the same year the better your ability for it to physically fit.
Watchout for your axle bolt count, most likely only to be 5 bolt for a 1500.
Then trying to find one that is actually a posi-lock may be a challenge. Check your mfg codes of the donor vehicle if possible.
Since you are not a 4X4 you don't have to worry about exactly matching any gear ratios, though the closer you can get to what you have the better your speedo will stay accurate. Check your mfg codes to determine what ratio you currently have.
01-04-2012, 10:04 PM #3
stay away from the gm g80 posi, its known as the governor bomb for a reason and junkyard know its common for them to blow up so they charge crazy amounts for them, you would be far better off with a auburn or eaton clutch posimy 88 sas "mudwasp"
88 chevy k2500, started as reg cab lb, now reg cab shortbox, sas 17'' of lift, 52'' front springs f.i. bbc , 79 dana hp 60 chevy outers, 14bolt ff spooled divorced 205 and cut 40'' gumbos
1998 k3500 gmc crew cab dually L65 6.5TD 4l80e with a couple of mods
bouncing truck avatar creator
By cajunevang in forum General Chevy & GM Tech QuestionsReplies: 1Last: 02-08-2010, 12:15 PM
By repete34 in forum GM PowertrainReplies: 1Last: 01-13-2010, 07:25 PM
By rmagni in forum GM PowertrainReplies: 4Last: 08-18-2009, 07:42 PM
By huntxtrm in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 0Last: 04-16-2009, 06:17 AM
By RATRODKING in forum GM PowertrainReplies: 7Last: 04-07-2009, 06:16 PM
Tags for this Thread