GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15
  1. #11


    Quote Originally Posted by SurrealOne View Post
    Nope. The ones I ordeed (again, not the ones in this thead) have a non-working LED on the driver's sider, so they're going back.
    Ugh...I hate that....mostly because I hate to wait!

    GMTruckClub members receive discounts off our normal rates! PM me for quotes! Check out our Films gallery - updated with over 200 Hydro Dip films!

    If it can be painted - it can be Hydro Dipped!

    Get the Gorilla!

  2. #12


    well forewarning for you guys who like these,
    i got a pair of these (well not exactly these, but damn close other than those arrow looking vents mine are straight lines,) basically same headlight,
    first and foremost:
    the looks on these things are wicked!
    do they look sweet?
    this is obvious.... yes!
    but... as far as functionality,
    im sure once you order them you will see that they are probably cheaply made as mine were, and are not compatible with HID,
    i had to do some slight modifications in order to even get my HIID bulb to fit due to some rubbing issues, and if its designed just like mine, then the projector bulb is not even sealed completely, you gotta add some of your own sealant and after all this being said and done i got everything to work just as i wanted. I have 10000K in mine and as far as light output, i will say that stock halogen projectors on newer cars put out more light than my babies, and it is noticeable. Also if you are mechanically inclined or have common sense you need to take a look at the high beam design... i though it looked cool having the second halo but think about it.... does it not look as if it completely ruins any even light output that could come out of the high beam bulb? well the sad fact is...
    IT DOES!
    i even replaced my high bulbs with 100W bulbs and upgraded wiring accordingly, no difference... the high beams were not thought of as important in these types of lights for out 99-02's, all of the emphasis was specifically aimed at the killer looks... (A+ in my opinion) but functionality is far from par. you can also see that the high beams (when parked close to a garage or wall) are actually focused in about 3 inches lower than the coutoff of the low beam, and for these headlights this is unadjustable without some major better have some sort of aux lighting because if you do any mountainous driving you will find yourself driving 10 mph just to see the road ahead above the low beam cutoff with pitiful high beams.
    needless to say i still run them but in order to feel safe i added some oem fogs to my 2000, and upgraded them to HID as well, and now together with my headlights i can see much of what i couldnt before, i also added a pair of 130W KC daylighter driving lights, since here, driving lights are allowed to be used on roads in conjunction with high beams only, i have the confidence to know if i ever needed some extra vision, permitting noone was in front of me, i would have it. you can check my thread
    for a glimpse of them at night
    my .02 cents... or $1.00 i guess considering how much i shared. lol
    Last edited by reggiecab2000; 01-27-2012 at 01:26 PM.
    2000 Chevrolet Silverado

    4.3L V6, 4L60E, 2WD, Single Cab
    Airaid CAI
    Poweraid TB Spacer
    Flowmaster 10-series exhaust (dumped)
    Edge CS insight monitor
    4.10 gears
    Limited-slip differential
    LS-1 Dual Electric fans
    Corvette tranny servo swap

    Head Unit: Alpine
    Speakers: Alpine SPR-60C 6.5" component set, 4X6 Infinity Kappas
    Subs: 2-12" Kicker CVT's
    Amps: Alpine-M1000 (subs), Alpine MRX-F65 (Speakers)

    305/70R16 NITTO Terra Grapplers
    16" PROCOMP 7089's
    2" leveling kit
    3" Fabtech Spindle Lift Kit
    Front/Rear-Bilstein 5100 shocks

    35W HID Low Beams
    RECON LED smoked roof cab lights
    HELLA LED taillights and 3rd brakelight
    HELLA FF-75 Aux. Reverse Lamps
    RIGID dually D2, flush mount, wide beam
    Hawk HPS Brake pads
    Russell braided steel brake lines
    Powerstop-red powdercoated brake calipers
    Powerslot Cryo brake rotors
    EGR in-channel window visors

  3. #13
    Sr. Engineer
    Join Date
    Oct 2010
    Indianapolis, In


    Realy nice looking lights. I have always been dissapointed in the stock lights performance both fog and driving and have not found any that have been declared better than stock by anyone other than the one doing the selling. Looks are nice but as Reggiecab reveals, it would be worthless to me if they don't work.
    2000 GMC YUKON SLT, 5.3L tow pkg, G80 rear/w 3.73 gear

  4. #14


    I added some projector headlights to my silverado a few days ago. They are plain jane with just a projector in the low beam but that's what I wanted. I too had an issue getting the HID's installed. The lamp bore is too small and I had to ream it out. The inside of the projector itself is of poor quality. The lights cutoff is pretty crappy. My stock headlamps with some regular bulbs were def brighter. They look cool but that's about it. I'm having a hard time finding a quality projector headlamp.

  5. #15


    They look cool tlight the black a little better, but I'm kinda partial to black. However the chrome ones are nice to depends on the style of your truck.

    2011 GMC SIERRA CREW CAB 2WD W/5.3

    Convenience Package
    : Adjustable Pedals, Remote Start, Electric Rear Window Defogger, Rear Parking Assist

    Power Tech. Package| Volant CAI| GMC Upgraded Grill| Line-X Premium Bedliner| AVS Smoke Headlight Covers| Demolded| AMI Black Grill Emblem| AMI Black Rear Emblem| EGR In-Channel Window Visors| IPCW Third Brake Light| IPCW LED Fiber Optic Tail Lights| IJDM Dome & License Plate LED's| Flowmaster Exhaust W/ 3" Black Chrome Tips| OEM 20" Rims W/ Goodyear Eagle LS2

    You can't get away from the STORM!

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Hey Guys
    By cwindham in forum Member Introductions
    Replies: 7
    Last: 10-14-2011, 03:02 AM
  2. What would you guys do?
    By ngchevy in forum Chevy Truck Talk & GM News
    Replies: 2
    Last: 09-12-2011, 09:24 PM
  3. How do you guys do it?
    By Wrench in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 28
    Last: 06-06-2010, 03:20 PM
  4. Replies: 4
    Last: 09-03-2009, 03:52 PM
  5. Sup guys...
    By Big J in forum Member Introductions
    Replies: 5
    Last: 08-11-2008, 05:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts