Results 11 to 17 of 17
Thread: Stainless or black
01-17-2012, 01:27 AM #11
I'm not a fan of the step rails (just my opinion) but if you don't want them to stand out the go with black. But you do have enough chrome accents to be able to go with stainless. My dad has some stainless rails on his truck & just about every dealer installed chrome accent available on a white Z71 & as much as I don't like chrome (also) his truck looks good. GO STAINLESS! Have fun truck looks good.
01-17-2012, 01:56 AM #12
Stainless if you want to show it off. Black if you want to use it for a getaway vehicle. Stealth mode!
Are you going to losd anything heavy in the bed? I wouldnt lower it if you plan to haul. Larger wheels and tires will help fill the empty spot.
Good luck and add pics when you decide and complete2010 Chevy Silverado Z71 ext cab.4x4
72 Monte Carlo 350-415 hp- sold (June 2011) to pay medical bills
79 Impala 350 4bbl 375 hp- sold (June 2011)to pay medical bills
"If He asks you to go a mile go two"
01-17-2012, 08:24 PM #13
Thanks everyone. y'all gave some things to think about. Wont be doing this for a bit< getting an idea for how much money i need to save> next thing im gonna do is headlights. Oh and any advice for a cold air intake? just started looking at them.
Chevy runs deep.
2001 Silverado ext cab 4.8l v8 2wd
40 series flowmaster dual with bowtie tips
Anzo tail light
Fire and ice lighted mud flaps
2 12inch kicker comps with boston acoustic amp
w2w nerf bars
Mega third light
Scanning light bar under tailgate
High 4 headlight kit
Rear side window covers<bowtie>
My velocity is directly proportional to your proximity.
01-17-2012, 09:47 PM #14
- Join Date
- Apr 2009
- Columbia Falls, Montana, United States
- Blog Entries
Unless you also go with a custom tune (and even then), I wouldn't waste your money on a cold air intake. Unless you have the skinny pedal on the floor at all times, they are pretty much useless. I'd just stick a K&N replacement air filter in your stock box and save your money for other mods.2005 Chevy Silverado W/T
4X4|4.8 with some mods (has only slightly more pull than a 5.3)|Auto|4 door ex cab|Cooper Discoverer AT/3's in 285-75/17's on Helo 842's|Cooper Discover M+S 265-75/17's on Devino DV349's|Flowmaster 40 Single in Dual out with custom bent pipe from the end of the cats back|2" Procomp leveling kit|Custom made center console|Custom dyno tunes|Air Raid CAI|Air Raid Throttle Body Spacer|Apex brand topper|Kenwood Head Unit with Kenwood speakers|Painted mirrors/grille|Debadged except front emblem|Bilsteins front and rear
Planned mods not in order
2 inch lift|Custom front/rear bumper|hitch tire carrier|roof basket on topper, bars on cab|finish center console build|install Midland CB|Power options|Tint|Custom made raised bed in the bed of the truck|Lund LunarVisor
Also have a 1992 Ford Ranger with a lot of stuff done to it. Currently waiting for a bit of a rebuild.
"The only woman I'm pimping from now on is Sweet Lady Propane. And I'm tricking her out all over this town."
01-19-2012, 08:06 PM #15
- Join Date
- Sep 2011
- Roswell, Ga.
01-20-2012, 02:26 PM #16
- Join Date
- Jan 2012
My vote's with the stainless nerf bars ..- Ted -
2005 Silverado 1500 Z71 Ext. Cab w/272K
01-20-2012, 02:41 PM #17
Polished stainless also has the advantage of handling the rock chips and scuffs you will INVARIABLY get when driving on gravel roads much better than black powder coat. It'll keep its look longer, as it's stainless and shouldn't rust -- whereas black powder coat will chip and then rust if you don't touch it up.
I like not having to touch up my bars, at all. Lower maintenance is always a plus...
By ljmueller in forum Chevy Truck AccessoriesReplies: 9Last Post: 07-30-2011, 05:25 PM
By Grey-02-Z71 in forum Chevy Truck AccessoriesReplies: 3Last Post: 08-31-2010, 06:29 AM
By pontiacGTP123 in forum General ClassifiedsReplies: 0Last Post: 05-27-2010, 10:48 AM
By Steve in forum Contests & GiveawaysReplies: 27Last Post: 03-06-2009, 02:07 PM
By Davandy in forum General ClassifiedsReplies: 0Last Post: 05-26-2008, 03:20 PM
Tags for this Thread