Results 1 to 3 of 3
01-17-2012, 07:22 AM #1
- Join Date
- Jan 2012
1997 chey 454 vortec no power to the coil
my timing chain jump so the truck was runing rough so i disconected the battery and changed the timing chain and gears retimed it and put it back together hooked the batery up and now when it turns over its not geting any power to the coil no spark at all any idea what could cause this???
01-17-2012, 10:21 AM #2
Check all wiring ...you have missed something .. crank sensor..ect.
01-17-2012, 11:57 PM #3
- Join Date
- Nov 2006
- Canyon Lake, Texas
- Blog Entries
Welcome to GMTC! If you don't get your answer with this post, ask your question in one of the "technical" sections. Good luck!
2010 Z/71 Colorado C/C
Black 4X4 w/5.3L V8
2007 Winnebago Adventurer
w/8.1L Chevy & Allison 6spd.
Canyon Lake, Texas
By cobra2end in forum Chevy C/K Truck ForumReplies: 12Last: 10-01-2012, 07:45 PM
By jad3500 in forum Chevy C/K Truck ForumReplies: 2Last: 10-19-2011, 10:10 PM
By alhutto in forum GM PowertrainReplies: 2Last: 09-08-2010, 02:54 PM
By ahlberg in forum GM PowertrainReplies: 7Last: 02-28-2010, 07:57 PM
By chevysub in forum GM PowertrainReplies: 3Last: 08-27-2009, 09:35 PM
Tags for this Thread