Results 1 to 10 of 34
01-18-2012, 01:03 PM #1
- Join Date
- Dec 2011
Which spray liner should I go with ?
I want to get a spray liner and wanted feed back on them. I'm looking at both Line-X and Rihno Liner. Any pros or cons would be greatly appreciated. Thanks
01-18-2012, 01:06 PM #2
I have the rhino lining and am very happy with it. It doesnt stay shiny but its typically dirty anywayDavid
2004 Silverado 2500 Crew Cab 4x4, AMSOIL EA air filter, Granatelli MAF sensor, Throttle body spacer, Magnaflow exhaust (true dual to 2 in 1 out muffler), 6" ProComp lift (add a leaf and 5" superlift rear block), Bilstein shocks, 35's (Cooper Disoverer ST) and 4.10 gears, Rhino Liner, EGRUSA fender Flares and widow visors, extended stainless steel brake lines, firestone airbags w/onboard air compressor, Pioneer Avic X940BT navigation, Accel backup camera.
1960 Land Rover Series II 88
2001 Pontiac Sunfire
2013 Toyota Avalon Limited (Wife's Car)
NRA Life Member
01-18-2012, 02:38 PM #3
rhino all the way ever had a problem it took a heck of a beating in my old truck. cleans up well, just hit it with a hose and shell come clean
01-18-2012, 06:01 PM #4
I used linex. I have had for about 7 months with no issues! Get the rear wheel wells done as well and over the rails! If you search there are lots of threads on this!
This is a good mod! Do you use the box a lot?
01-18-2012, 08:50 PM #5
- Join Date
- Dec 2011
Yeah it gets lots of abuse I'm a vol ff and load hose in it after fires so lots of water and what not. I have looked into both brands and not sure which to go with .
01-18-2012, 09:27 PM #6
Chalk another one up for Rhino Liner. The previous owner had the Rhino Liner installed and it's held up very well since it's been in the truck. I mainly use the bed for hauling tools, scrap metal, lawn equipment, and occasionally furniture, no complaints yet.04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
01-19-2012, 08:08 PM #7
- Join Date
- Sep 2011
- Roswell, Ga.
Here's another vote for Line-X. I've dragged metal all over my bed and not a scratch on the liner.
01-19-2012, 08:56 PM #8
I had the same question, but it seems like Rhino wants Rolls Royce prices too compared to their competition..... $500 for a 6.5ft short bed?
01-19-2012, 11:21 PM #9
i got a buddy that has grizzly grip in and on his truck its been through hell and back(im bout to buy some wit my tax return) but its a do it ur self kit come with everything and u can choose a color if u dont want black... its www.grizzlygrip.com comes wit pretty much everything u need check it out its pretty good stuff2005 Chevy Silverado LS 5.3/ K.N cold air intake / jet preformance thottle body spacer/ stage 2 jet preformance chip/ 3 inch rough country suspension lift/ 17 inch Mickey Thompson classic lock/ 285.70.R17 wild country MTX/ true duel cat back 3inch exhaust/ front custom push bar/ custom roll bar/ 2 10 inch aq subs in custom box/ custom center console/ more to come hopfully
01-20-2012, 12:34 AM #10
My bed has been sprayed with Line-X for about 2 years now and it has held up great. I've put it through some pretty decent abuse (hauling pavers, bricks, metal, etc.). It shows no sign of cuts, missing chunks, or any sort of damage. I would certainly use it again... especially with that life time warranty. It also washes out really well.
By seanhill1969 in forum Chevy Silverado Forum (GMC Sierra)Replies: 18Last Post: 11-07-2011, 02:04 PM
By Chevy Newby in forum Chevy Truck AccessoriesReplies: 7Last Post: 10-01-2010, 02:14 AM
By toleo in forum Chevy Truck AccessoriesReplies: 0Last Post: 05-17-2010, 11:47 AM
By ThatSilverStepside in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 02-03-2010, 10:32 PM
By nos351wcm in forum General Chevy & GM Tech QuestionsReplies: 8Last Post: 01-31-2010, 09:07 PM
Tags for this Thread