GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 5 of 5

Thread: camber kit

  1. #1

    Default camber kit

    I have a 1996 chevy cheyenne. When i crank my torsion bars up the out side of my tires chew right off. My question is can i just get away with doing a camber kit?

  2. #2


    Has anyone done a camber kit?

  3. #3


    The camber kit is intended to allow the truck to be aligned. Actually, you have to knock the plugs out of the alignment slots in the frame before you put the kit in so you can adjust the alignment. It's not very hard to do, but you will need to get it aligned when you're done.
    Good Luck and God Bless

  4. #4


    Thank you for the info.

  5. #5


    the camber pins fell out when i did mine, i couldnt beleive it, never saw that before.

    2003 GMC Sierra 1500 SLE 5.3
    Factory Tint
    Recon Taillights
    2.5 ReadyLift Leveling Kit
    Low Profile Toolbox
    Westin Nerf Steps

Similar Threads

  1. Looking for Camber kit- pro comp6 inch - silverado
    By livetoridemoto119 in forum Lifted & Offroad Suspension
    Replies: 1
    Last: 01-23-2010, 09:29 PM
  2. 96 k1500 too much positive camber?
    By mike1193 in forum Chevy C/K Truck Forum
    Replies: 3
    Last: 12-07-2009, 04:33 PM
  3. too much negative camber ?
    By RATRODKING in forum Lifted & Offroad Suspension
    Replies: 1
    Last: 10-30-2009, 03:02 PM
  4. Question about negative camber
    By ProjectJimmy in forum Lifted & Offroad Suspension
    Replies: 5
    Last: 02-23-2009, 04:30 PM
  5. Camber plate
    By scottkh in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 1
    Last: 07-16-2008, 10:13 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts