GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 6 of 6
  1. #1

    Default Adjusting power steering pulley

    Hi everone I have a problem with my 99 suburban. I have read a lot of threads about belt noise and the best thing I have heard is to adjust power steering pulley need to know how to do that any help would be great
    Mike sterling heights michigan

  2. #2


    Welcome to the G M T C ! If you don't get an answer here, post in one of our "technical" forums. Good luck!

    2010 Z/71 Colorado C/C
    Black 4X4 w/5.3L V8
    2007 Winnebago Adventurer
    w/8.1L Chevy & Allison 6spd.
    Canyon Lake, Texas

  3. #3


    Welcome! You should likely post in one the technical forums as more people will read your inquiry than here.

  4. #4


    Welcome to the Club. Check tension before adjusting anything. Also check the belt for shiny surface which may indicate one or more pulleys may be frozen. Also check belt for cracks. If belts look good Get a bar of Ivory soap, start your engine and carefully hold bar of Ivory on inside of belt for about 30 seconds. It usually takes away all those Halloween sounds(Screeching).
    2010 Chevy Silverado Z71 ext cab.4x4
    72 Monte Carlo 350-415 hp- sold (June 2011) to pay medical bills
    79 Impala 350 4bbl 375 hp- sold (June 2011)to pay medical bills

    "If He asks you to go a mile go two"

  5. #5


    Thanks for the help I will give that a try

  6. #6


    let us know how it goes

Similar Threads

  1. Power steering or power brake booster gone bad?
    By Ateupjoe in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 2
    Last: 12-19-2011, 09:07 AM
  2. Power steering pulley installation, threading?
    By LevyChevy in forum General Chevy & GM Tech Questions
    Replies: 0
    Last: 11-01-2010, 10:14 AM
  3. 99 Burb Power Steering Pump pulley
    By spyder2000 in forum General Chevy & GM Tech Questions
    Replies: 3
    Last: 02-23-2009, 09:32 AM
  4. Idler Pulley and tensioner pulley replacement
    By collinsperformance in forum GM Powertrain
    Replies: 6
    Last: 01-04-2008, 01:20 PM
  5. help power stearing pump pulley fell off
    By wallwins in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 2
    Last: 03-31-2007, 04:50 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts