GM Truck Club
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 3 of 3 FirstFirst 123
Results 21 to 28 of 28
  1. #21


    lol.. i was actually thinking of stripping it of badges with the exception of the front bowtie. I was thinkin of getting some letters made that look mostly stock to put along the bottom of the tailgate saying "TRUCK NORRIS" but i dunno hahahahaha

    "If you're not living life on the edge, You're taking up too much space"

    "Truck Norris"
    - 2008 TX Edition Silverado
    - McGaughy's 4/5 Drop Kit
    - Apline Type R 10s & Amp
    - Pioneer 6 Disc Touchscreen Deck
    - Nightmare Breed Motorsports custom tune
    - Custom 3" dual exhaust through x-pipe dumped at axle
    - Airaid CAI
    - Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
    "Kristine" - 1991 Nissan 240sx
    - Cut to pieces, LS build pending

  2. #22


    Yeah i already debadged my whole truck except my black bowtie on tailgate. I might buy the rbp badge for my grille for $90 which is crazy and a emblem for center of grille

    2008 Chevy Silverado Ext. Cab Lt Z71 5.3 V8
    7.5 Inch Rough Country Suspension Lift
    RBP Replica Grille Black w Chrome Rivets
    Recon Smoked Cab Roof Lights
    N-Fab Powdercoated Gloss black Cab Length Nerf Steps
    5% Tint over 20% all the way around / 5% Eyebrow Strip
    AVS Smoked Window Visors
    Z71 Stickers Black & Metallic Silver
    Tow Mirrors / Smoked Turn Signals
    XM Satellite Radio Fin / Color Matched
    Interior Plastic Pieces / Color Matched
    Power Acoustic Tweeters
    Painted Bowties / Color Matched
    Painted Door Handles / Color Matched
    Smittybilt Bull Bar / Color Matched
    Custom Rolled Edge Exhaust Tips / Color Matched
    Custom 2.5 Inch Cat Back True Dual Exhaust
    Flowmaster Super 40 Series Dual in / Dual out
    Magnaflow Tru-X Pipe
    K&N Air Filter
    18x9 Rockstars Machined Black
    Center Caps / Color Matched
    33.13.50 Nitto Terra Grapplers
    New Front Wheel Well Liners
    Eagle Eye Black L.E.D. Tailights
    Eagle Eye Black L.E.D. Third Brake Light / Smoked
    Eagle Eye Black L.E.D. Halo Projector Headlights
    Notto HID Kit 10,000k Low beams
    Recon L.E.D. Light Bar
    Buschwacker OE Style Tailgate Cap
    AMI Gloss Black Antenna
    Debadged Chrome Lettering
    Door Molding Removed

  3. #23


    Click image for larger version. 

Name:	DSCN0244.jpg 
Views:	49 
Size:	79.4 KB 
ID:	34225Click image for larger version. 

Name:	DSCN0245.jpg 
Views:	53 
Size:	81.8 KB 
ID:	34226Click image for larger version. 

Name:	DSCN0246.jpg 
Views:	48 
Size:	67.2 KB 
ID:	34227I took some pic's today after i cleaned the front end up look's much better now. The tow hooks i plan on installing sometime this week though.

  4. #24


    Having once had a bull bar and removed it for a cleaner look, I'm a fan. But the grille is just too "see-through" for me. It looks good from a distance, but I can't stand how you can see the engine compartment. I think that you should make painting your bumper a priority as well. It would really tie it all together.

  5. #25


    Yeah as far as the grille the pic's make it seem like it shows that much of the engine compartment but really doesn't. The bumper i do plan to get painted along with tow mirrors. The fog lights i plan on getting are halo projector and plan to mount them behind the grille and also have a emblem and badge for the grille so you really want even see any of engine compartment that's all it really needs.

  6. #26


    Well i think i changed my mind about selling the bull bar. I saw on the bull bar where the skid plate is screws to take it off so i decided to take it off. This will let me have the bull bar on and also have the license plate on the front. The small brackets on each side that the skid plate was held on by on the bottom were welded so i got a hammer and they came off pretty easy. Only thing is they left a tint hole which is really small and i'm gonna grind the weld's off the brackets and fix the holes with jd weld that way i want have to do any painting. The license plate frame i'll have to buy a new one since the small rivets holding it on i had to cut whenever i took it off awhile back. I'll keep everyone updated tomorrow.

  7. #27


    Think your truck would look great if you had a Road Armor style bumper
    2000 Chevy Silverado 4WD Classic
    2'' lift Torsion Keys and air shocks
    33/12.50 Hankook Dynapro M/T
    3 1/2'' down pipe back 6" Tip
    Dodge Towing Mirrors
    Smoked Tails, Cab Lights, and Side Marker Lights
    1% Rear and Side Window, 20% Front Tint
    American Racing Wheels/ With a custom black paint
    Cold Air Intake
    Edge Performance Chip
    Custom Audio System
    LED Tails
    Black background headlights and parking lights

  8. #28


    Quote Originally Posted by Rockstarrchevy81 View Post
    Yeah man looks better to me and tryin to sell it now. I just want my tow hooks and license plate back on and will mount lights behind grille and along with a emblem.
    I was bout to reply you need some lights behind the grill. I like it without it. Ever thing bout color matching that chrome? At least till you get your bumper you could plastidip it for 4 bucks
    2009 chevy 1500 z71 4x4
    2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
    1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod

Page 3 of 3 FirstFirst 123

Similar Threads

  1. More ads have been removed for registered members
    By ChevyFan in forum Announcements & Feedback
    Replies: 0
    Last: 11-11-2011, 11:42 AM
  2. Removed Flowmaster
    By groceryman in forum Chevy Truck Accessories
    Replies: 5
    Last: 08-30-2009, 05:49 PM
  3. Removed fuse and DRL still works -
    By sstoner911 in forum General Chevy & GM Tech Questions
    Replies: 5
    Last: 06-03-2009, 04:15 PM
  4. Removed lettering from doors
    By RatRod in forum Chevy Truck Accessories
    Replies: 4
    Last: 12-30-2007, 03:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts