Results 51 to 60 of 77
03-01-2012, 09:45 PM #51
03-01-2012, 09:51 PM #52
- Join Date
- Sep 2009
- Northern GA
- Blog Entries
All I gots a car port, once it's all finished ima bring it up here n leave it at my girlfriends house sheath has a garage. But they wouldn't be happy with me doing all the work in there. I begg them a few times a week tho2009 chevy 1500 z71 4x4
2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod
03-03-2012, 03:01 AM #53
lowered trucks to a level stance do look good, with that i mean a very small drop in the rear. anything to where the front and rear get dropped to me IMO is just too much. of course ive always been a lifted truck man. 2wd trucks lowered with a ton of power is good tho too. as far as the wing if its not obnoxiously big i see no problem with that.
2010 Silverado Z71
"Fueled by Haters"
TCS front box 7"-9" set at 8.5" | FTS coilovers(blue coil) with resis and FTS shocks with resis| 20" Fuel Off-Road Revolver Rims | 35x12.50 Nitto Trail Grapplers | Halo Projector Head Lights by Recon- Black | Led Taillights by Recon- Smoked | Dumped Straight pipe | Volant CAI | Ranch Hand Front Bumper | DiabloSport Trinity Programmer | Tow Mirrors with Turn Signal | Cervinis Ram-Air hood | 4.56 USA gears with tru trac locker | Longshot Lighting 6000k 55w low beam and 6000k 35w fogs HIDs | 7" lift leaf spring | Blue TCS traction bars
Future Mods: Long tube headers | Custom tune | Cam | Stall Converter
03-10-2012, 12:46 AM #54
So, I went ahead and put a drop on my truck... but I'm skeptical as to the workmanship and parts that were used vs. the parts that I was told were going to be used. I asked for a 3/5 and they told me that it would be a McGaughy's kit (2"drop spindle and 1"spring in the front, flip kit and 2" hanger in the back)... but I went to pick up Truck and the front doesn't look as low as it should, and the spring is definitely still stock. Anybody heard of a 3" drop spindle from McGaughy's? Other than that, I LOVE THE NEW RIDE.
"If you're not living life on the edge, You're taking up too much space"
"Truck Norris"- 2008 TX Edition Silverado
- McGaughy's 4/5 Drop Kit
- Apline Type R 10s & Amp
- Pioneer 6 Disc Touchscreen Deck
- Nightmare Breed Motorsports custom tune
- Custom 3" dual exhaust through x-pipe dumped at axle
- Airaid CAI
- Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
"Kristine" - 1991 Nissan 240sx
- Cut to pieces, LS build pending
03-10-2012, 03:18 PM #55
I would give it a couple of weeks to settle down before you start questioning it. I put a 2" drop on my 07 Eclipse. It took it a couple of days to settle down to the manufacturer promised height.
On another note, that look FREAKING SWEET!
2010 OEM 20" Wheels
Color-matched mirror covers and emblem
20% tinted windows - 6" eyebrow
Black rear fender-wells
Completely debadged and demolded
Duramax airbox replacement w/ K&N filter
2" Rear drop shackle
Tailgate light bar
Flowmaster Delta 50 w/ double tip exits
Blue footwell lighting
12" Pioneer Sub (custom downfire box) 850W amp
Full LED interior
03-10-2012, 08:58 PM #56
03-10-2012, 10:08 PM #57
03-10-2012, 11:39 PM #58
Yeah, Fernando has some questions to answer face to face when i get back from the field!
04-10-2012, 03:03 AM #59
I ordered, received and installed my new DIC panel for Truck Norris last month and never posted on it. Works like a charm, took all of 3 mins to install!
Installed it right before i made the trip to Waco to pick up the two blocks for modding! I'm altogether please with it!
Also ordered my roll pan yesterday, it's already on its way to my house and should be there when I get home!
Found the hood I think I'm going to get, but curious to know if anyone else has heard of the company that makes it?
That's a link to it, it looks pretty legit to me. Just looking for others' input.
LOL.. I suppose this is going to turn into my build thread. Anybody got a problem with this?
Last edited by 08_rado_rocker; 04-10-2012 at 09:10 AM.
04-10-2012, 10:30 AM #60
- Join Date
- Mar 2012
- Regina Saskatchewan Canada
- Blog Entries
I have lowered and lifted quite a few trucks in my days, i have never owned a lowered truck, they are cool just not for me, I will say i find it harder and more costly to lower them properly, then it is too lift them, and now a days I would think the costs are relatively close lift or lower the 3 or 4 inches.....
all the lowered trucks i have done have left my shop ... to go to a body shop and get some ground effects on them to finnish and thats what i like the best about them. the sleek looks when they are finished....
By Steve in forum Lowered & Urban SuspensionReplies: 7Last Post: 04-15-2012, 06:12 PM
By Steve in forum Lowered & Urban SuspensionReplies: 14Last Post: 04-03-2012, 11:22 PM
By 00chevy53 in forum Photo & Video GalleryReplies: 11Last Post: 03-24-2012, 03:03 AM
By Steve in forum Lowered & Urban SuspensionReplies: 7Last Post: 02-22-2012, 09:23 PM
By 09silvy in forum Chevy Silverado Forum (GMC Sierra)Replies: 12Last Post: 08-14-2010, 05:09 PM