Results 1 to 1 of 1
01-30-2012, 08:34 PM #1
- Join Date
- Dec 2011
Vaccum line routing from transfer case switch?
I'm trying to sort out some burnt / mis-routed vaccum lines on my 03 ZR2. Why does the tranfer case vaccum switch have a 3 line connector. I would think that 1 goes to energize the front axle actuator under the battery - and 1 goes to vaccum source (T off EGR valve on my truck). Where does the 3rd line go?
Also, does someone have a link to a good vaccum diagram for this circuit. I have a Haynes manual and Alldata subscription but neither is much help.
Mike2003 Chevy S10 ZR2
By Chevrolet in forum Chevy C/K Truck ForumReplies: 5Last Post: 09-23-2011, 04:11 AM
By tlavergne in forum GM PowertrainReplies: 2Last Post: 01-21-2011, 10:56 AM
By tpkamp in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last Post: 06-26-2010, 11:09 AM
By grumpy old man in forum GM PowertrainReplies: 5Last Post: 05-21-2010, 06:20 PM
By firstname.lastname@example.org in forum GM PowertrainReplies: 0Last Post: 04-05-2009, 11:17 AM