Results 1 to 2 of 2
Thread: Power Window Help
01-31-2012, 02:09 PM #1
- Join Date
- Feb 2010
Power Window Help
All of a sudden neither of my passenger windows work - I replaced the regulator and motor in both front doors within the last year. The front makes no noise and doesnt dim the lights when the switch is pushed but the rear dims the lights slightly and makes that slight clicking sound. Neither will operate from the main switch or the individual door switches.
Please help with a diagnostic procedure I should follow - to check electrical with a multimeter, etc.
I don't want to spend the money on the main driver's door switch assembly unless I'm sure that's the problem.
Lumpy - 2003 Suburban
02-01-2012, 08:15 AM #2
- Join Date
- Feb 2008
- Cloquet, Minnesota, United States
- Blog Entries
Sadly this sounds like a BCM (body control module) which is very common on the GM trucks, and can really only be diagnosed by a dealer with the right software to troubleshoot it (some shops have the ability too)Mike
1997 Chevy S-10 Blazer 4X4 with 330K miles and counting (Hunting rig).
2009 Saturn Aura XE (wifes car)
2011 F-150 Crew 4X4
"Hold it to the floor till you see God.... Then Brake!!!!"
By Block8head in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 10-27-2010, 12:03 PM
By vncj96 in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 09-29-2010, 12:49 PM
By hotchickwitha454 in forum Chevy Suburban Forum (GMC Yukon XL)Replies: 7Last Post: 11-03-2009, 03:48 PM
By BigFalcone in forum Chevy Silverado Forum (GMC Sierra)Replies: 4Last Post: 10-11-2009, 01:06 AM
By zamjohn in forum Audio, Video & Gadget TechReplies: 5Last Post: 09-06-2009, 11:01 AM