GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 9 of 9
  1. #1

    Default Winch in front bumper of 09 silverado

    Ive tried looking around for it, has anyone heard or seen this?
    2009 chevy 1500 z71 4x4
    2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
    1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod

  2. #2

    Default

    In the stock bumper? I dont thing there is enough room to fit a winch worth having IMO. Look into a Curt front mounted hitch and do a cradle setup.

    ________2013 4C Rated__________


  3. #3

    Default

    I want something clean there looked like enough room. But I'd do with a full replacement if I can't do this
    2009 chevy 1500 z71 4x4
    2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
    1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod

  4. #4

    Default

    The Warn hidden winch carrier kit (http://www.warn.com/truck/mounting-s...iddenkit.shtml) is likely what you seek. It's not offered for NNBS trucks.

    They appear only have the Trans4mer kit (http://www.warn.com/truck/mounting-s...er_mount.shtml) available for half ton NNBS trucks ...and Trans4mer Gen II for 2500's and up.

    Surreal

  5. #5

    Default

    There is very few options for us NNBS guys to mount a winch.

    ________2013 4C Rated__________


  6. #6

    Default

    Thatvfirstvone for the old silverado is what I'm looking for. I think I might try to replace the center section of the bumper with a metal piece that'll hold the bumper. I'm gunna take it apart today and see what's possible, but I winch will fit back there
    2009 chevy 1500 z71 4x4
    2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
    1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod

  7. #7

    Default

    Did you have any luck with this project?

  8. #8

    Default

    No i ended up getting fab fours bumpers. I have yet to mount them I'm cutting it close on tire clearance to begin with and the added weight will make me scrub. Waiting to install when I lift.
    2009 chevy 1500 z71 4x4
    2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
    1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod

  9. #9

    Default

    Quote Originally Posted by ahmitchell1 View Post
    No i ended up getting fab fours bumpers. I have yet to mount them I'm cutting it close on tire clearance to begin with and the added weight will make me scrub. Waiting to install when I lift.
    Gotcha. Thanks. I want to retain the factory look of this truck for now. I would like to add a winch and was hoping to go this route, but it looks like receiver mount may be the best option.
    Last edited by kyhokie; 01-08-2013 at 01:27 PM.

Similar Threads

  1. Fab Fours Armor winch Front bumper 2007+ GMC 2500 3500 - $950
    By Enkeiavalanche in forum General Classifieds
    Replies: 0
    Last Post: 09-14-2011, 08:30 PM
  2. Which winch bumper?
    By Heavydutycat in forum Chevy Truck Accessories
    Replies: 7
    Last Post: 01-31-2011, 10:19 PM
  3. Winch & bumper
    By lakelanierboater in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 0
    Last Post: 01-24-2011, 09:36 PM
  4. Winch bumper/brush guard for '90 Burb 4x4?
    By omnisi in forum Chevy Suburban Forum (GMC Yukon XL)
    Replies: 7
    Last Post: 10-21-2009, 09:56 PM
  5. Winch bumper
    By bbforguson in forum Chevy Truck Accessories
    Replies: 1
    Last Post: 10-10-2008, 07:13 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •