Results 1 to 1 of 1
Thread: 4l60e rebuild question
02-02-2012, 07:36 AM #1
4l60e rebuild question
HI guys, rebuilding the tranny but I have a question. Everything rolls well with the back end of the rebuild, but as soon as I ad the retaining ring to the low and reverse clutch pack, nothing moves! Is this normal?
PS. this is the first time at rebuilding and automatic.
---------- Post added at 07:36 AM ---------- Previous post was at 07:32 AM ----------
Also, I am having a huge amount of trouble in trying to get the rear shaft in deep enough to apply the snap ring to retain it. I need maybe another 5mm to push through, but the only way I can see that happening is to remove a friction plate or a steel from the clutch pack. as it is right now, they clutch pack height is perfect according to the GM Manual. Any help?
By 951500 in forum GM PowertrainReplies: 1Last: 03-30-2011, 05:50 PM
By ChivaLRy in forum GM PowertrainReplies: 13Last: 03-18-2011, 12:23 PM
By ahobson1 in forum General Chevy & GM Tech QuestionsReplies: 5Last: 06-24-2010, 10:15 PM
By 951500 in forum How-to GuidesReplies: 2Last: 12-06-2009, 07:52 AM
By 951500 in forum GM PowertrainReplies: 0Last: 12-05-2009, 03:19 PM
Tags for this Thread