Results 1 to 3 of 3
Thread: Leveling Kit ?'s
02-05-2012, 07:43 PM #1
- Join Date
- Feb 2012
Leveling Kit ?'s
I'm looking at leveling my 2007 Avalanche. I'm looking at going up in the front 2.5" and keeping the stock ride height in the back. I like the look of a leveled truck, and a friend mentioned the benefits of having a more even weight distribution over all four wheels. However, a retailer told me I need a slight rake to take weight off of the rear suspension! Is he right?? I'm confused. Now it doesn't have to be perfectly level, I would be satisfied if it was within less than an inch. Now my truck has 80,000 miles, and I would like to replace/upgrade the shocks and/or struts as well, so a kit that focuses on replacing those rather than spacers or whatever would be preferable. I have been looking at the Rancho Quicklift Loaded up front with 9000XL shocks in the back. I've also looked at Truxx adj leveling kit that seems to be nice. I would like to hear my options, pro's and con's, price etc. Also if i could get packages that include shocks and struts that would be cool. I have a buddy that has a shop to do it at, so difficulty of installation etc. isn't a problem. Let me know what you guys think I should go with.
02-05-2012, 07:50 PM #2
- Join Date
- May 2011
- Myrtle Beach, SC
- Blog Entries
Welcome to the Club!!! The Rancho Leveling kit is very well made. There are a ton of options out there. You may want to check Ebay also. There is alot of options available on there also.
(Scott) Myrtle Beach, SC
January 2012 ROTM WINNER
2011 GMC Sierra Z71 MAX 6.2 L w/ Trailering Package
Rough Country, XD Rockstars, Nitto Trail Grapplers, N Fab, Lund Genesis, Putco, Gator Grip,
Flowmaster 40 series, Diablosport InTune, Banks Ram Air CAI,
WeatherTech, AVS Aeroskin, Tow Mirrors, Upgradeyourauto.com
02-05-2012, 09:12 PM #3
- Join Date
- Apr 2009
- Columbia Falls, Montana, United States
- Blog Entries
Welcome! To answer your question regarding the rake, the factory does put a rake on the truck so that when you put weight into the bed or cargo area, the rear end will not sag causing the front to lift. Adding a leveling kit will cause it to do this when hauling heavy loads, but honestly how often does an Avalanche see heavy enough loads to cause excessive front end "lift"?
Bilstein makes a leveling shock (believe it's the 5100 series) that supposedly will level the front out, but don't quote me on that. I myself have a Procomp leveling kit installed on my truck and have had 0 problems. Brought the front end up a total of 1" and 7/8's of an inch. I believe it was about $250 installed at my local tire shop.2005 Chevy Silverado W/T
4X4|4.8 with some mods (has only slightly more pull than a 5.3)|Auto|4 door ex cab|Cooper Discoverer AT/3's in 285-75/17's on Helo 842's|Cooper Discover M+S 265-75/17's on Devino DV349's|Flowmaster 40 Single in Dual out with custom bent pipe from the end of the cats back|2" Procomp leveling kit|Custom made center console|Custom dyno tunes|Air Raid CAI|Air Raid Throttle Body Spacer|Apex brand topper|Kenwood Head Unit with Kenwood speakers|Painted mirrors/grille|Debadged except front emblem|Bilsteins front and rear
Planned mods not in order
2 inch lift|Custom front/rear bumper|hitch tire carrier|roof basket on topper, bars on cab|finish center console build|install Midland CB|Power options|Tint|Custom made raised bed in the bed of the truck|Lund LunarVisor
Also have a 1992 Ford Ranger with a lot of stuff done to it. Currently waiting for a bit of a rebuild.
"The only woman I'm pimping from now on is Sweet Lady Propane. And I'm tricking her out all over this town."
By suburban2500 in forum Lifted & Offroad SuspensionReplies: 0Last Post: 11-22-2009, 08:13 PM
By Texashoopty in forum Chevy Truck AccessoriesReplies: 3Last Post: 11-13-2009, 07:12 AM
By iPublicEnemy47 in forum Lifted & Offroad SuspensionReplies: 11Last Post: 06-15-2009, 11:42 AM
By Jimbo74 in forum Lifted & Offroad SuspensionReplies: 0Last Post: 03-15-2009, 08:47 PM
By Swatchvy in forum Lifted & Offroad SuspensionReplies: 15Last Post: 03-09-2009, 06:32 PM
Tags for this Thread