Results 1 to 3 of 3
02-06-2012, 08:56 AM #1
Pulling steering wheel, help needed. 2000 k2500
Hi, yes I searched and could not find information.
Just got this truck and steering wheel is on upside down. I want to pull it and flip it. Haven't pulled one with air bag, so can somebody help me out here with the proceedure?
It's a 2000 K2500 crew cab.
89 K Blazer 4" lift 35x12.5x15, warn hubs, cut out flares. Soon to have headers, posi carriers, gears.
2000 K2500 Crew Cab 5.7 285/75R16's. 3" Body lift. Suspension parts being ordered.
Lots more to do on both the trucks
And a bunch of fast Buicks
02-06-2012, 12:38 PM #2
Look at the side of the steering wheel, down on the column. You will see a hole on each side, stick an Allen wrench in there and press. It will collapse a pin, collapse both pins and then the airbag will be ready to remove. Disconnect both plugs and then you are done.
02-06-2012, 12:47 PM #3
Got the wheel off, and now back on.
No air bag on this truck.
By trxr501 in forum GM PowertrainReplies: 4Last Post: 08-19-2010, 12:03 AM
By trxr501 in forum GM PowertrainReplies: 11Last Post: 08-04-2010, 02:39 AM
By doug_scott in forum General Chevy & GM Tech QuestionsReplies: 2Last Post: 06-02-2010, 08:29 AM
By GeoK in forum GM PowertrainReplies: 1Last Post: 01-12-2010, 10:53 AM
By DutchTBI in forum General Chevy & GM Tech QuestionsReplies: 4Last Post: 02-11-2008, 06:36 AM