Results 1 to 3 of 3
Thread: Exhaust Flange
02-08-2012, 07:18 PM #1
- Join Date
- Jan 2012
I have a 1995 K2500 with a 7.4, the exhaust flange studs have rotted to almost nothing along with the flange. I manged to get the manifolds of and with enough heat and PB Blaster I got the studs out. Now i need to find a replacement flange but i can not find the correct size the 3 holes wont mach up. Does anyone know where i can find the correct flange?
02-08-2012, 08:58 PM #2
Looking at the GM parts listings, the flanges are part of the Y-pipe assy(not available anymore). So you are not likely to find them thru a GM parts listing.
You may be able to find them thru a local custom muffler shop.
02-08-2012, 11:57 PM #3
You could probably find the Y-pipe at a salvage yard or auto wrecker. Or try ebay.
---------- Post added at 11:57 PM ---------- Previous post was at 11:55 PM ----------
http://www.ebay.com/itm/FlowTech-Cat...sories&vxp=mtr this a complete replacement Y-pipe04 ECSB Custom silver & grey, Soft 8's, BFG KO's, ReadyLift Leveling Kit, Hellwig front sway bar, K&N filter, DeeZee EZ-Down, Rhino liner, Alpine CDE103BT, Rockford 6.5's, 12" V.A.T. Hammer Pro in a Subthump box, Alpine PowerPack amp, Hifonics amp, BackRack w/ 55w 5000k HID KC Daylighters, KC light bar with 4 KC Slimlites, UWS toolbox, Shaved Antenna mod, Black Bowtie, LED backup, license plate, dome lights & 3rd brake light
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 04-06-2011, 12:40 PM
By kcfocus1 in forum General Chevy & GM Tech QuestionsReplies: 3Last Post: 12-10-2010, 08:43 PM
By BigBlueLB756 in forum General ClassifiedsReplies: 3Last Post: 11-04-2010, 04:47 AM
By colton05 in forum GM PowertrainReplies: 1Last Post: 02-23-2010, 03:36 PM
By Dirtysailor in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 12-16-2009, 12:31 PM