GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 3 of 3
  1. #1

    Default New Member!! Skid Plate - Need one!

    Hello GMTC Forum folks!

    Yes, I am new and PROUD OF IT ha!

    Ok.. So, I have this "New to me" fully stock 1999 GMC Suburban SLT k1500 w/ a peppy 350.. Picked up recently with less than 90,000 miles on it! BUT, the previous owner tossed the skidplate.

    I am in the market for a frame rail to frame rail style skid plate, or something that would cover enough junk under the truck so i am comfortable..

    I would like to protect:
    1. Front Dif
    2. Oil Pan
    3. Transmission pan and xfer case

    Any ideas? I am considering building my own but would need to replace my defunked welder first.. so if cost of building is less than the cost of buying i willl be building

    Many thanks to those out there that have to read my above post! for putting up with a new guy!

    Mark

  2. #2

    Default

    I would look at a local salvage yard. If there is a pull-a-part near you then you might be set. Then you could just pull one off of another 1999. You might want to measure, but I am pretty sure that the plates from a z71 would fit. It might require some drilling and tapping for mounting if the holes are not already there. Alternatively, you can check out GMpartsclub.com here are some prices I came across for a 2001 truck. They will not fit yours, but it should give you an idea. The prices are not that bad.
    GM PART # 15843753 Aluminum Skid plate protecting oil pan
    GM LIST: $39.24


    GM PART # 15049809 Aluminum skid plate protecting transfer case
    GM LIST: $32.97
    Last edited by Pikey; 05-08-2013 at 01:52 PM.

    1995 Silverado 4x4
    6" BDS Suspension Lift-3" Body Lift-Add A Leaf in rear -Trailmaster SSV Shocks-Duel Steering Stabilizer Kit -AirAid Cold air intake-
    4.56 Gears with Detroit Auburn Locker-Pro-Comp Traction Bars with duel shocks-Aluminum Skid Plate Kit-38.5" x 16.5" Mickey Thompson Baja Claws-Constant Dropping fuel gauge

    2005 Yukon XL Jet Power Programmer, Bilstein Shocks, Bilstein rear springs, Helwig Anti-sway bars, EGR Window Visors, EGR Hood Shield, Denali Headlights, Headlight harness upgrade, GE NightHawk Bulbs, White Night Rear lighting system, Russell Braided SS brake lines, PowerStop Brake pads, PowerStop cross drilled and Slotted Rotors, http://www.gmtruckclub.com/forum/sho...5-GMC-Yukon-XL
    2002 Silverado ext cab 2wd (Sold)
    2003 Yukon XL (Totaled)

  3. #3

    Default

    i second the salvage yard. you find these trucks in there allllllll daaaaaaaaaay loooooooooong
    bob seger sold millions
    like a rock
    Gas was $1.83 when Obama took office.....

Similar Threads

  1. Skid plate for a 6" Fabtech
    By jmanb in forum Chevy Truck Accessories
    Replies: 15
    Last Post: 12-19-2011, 05:42 PM
  2. skid plate
    By Burden33 in forum Chevy Truck Accessories
    Replies: 0
    Last Post: 06-11-2010, 07:38 PM
  3. FS: 08 Z71 front skid plate and shocks/struts
    By aftriathlete in forum General Classifieds
    Replies: 0
    Last Post: 05-06-2010, 10:11 PM
  4. ideas for front skid plate for Silverado?
    By kawasaki_kid in forum Chevy Truck Accessories
    Replies: 1
    Last Post: 01-28-2010, 10:32 PM
  5. fuel tank skid plate
    By Bill B in forum Chevy S10 Forum (GMC Sonoma)
    Replies: 0
    Last Post: 07-08-2008, 09:58 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •