Results 1 to 2 of 2
Thread: Front bumper impact strip
02-14-2012, 06:33 PM #1
Front bumper impact strip
guy, i need to replace my front bumper impact strip and license bracket on my 1990 chevy k-1500.
i see on the ends of the strip its held on with a nut on each end, but throughout the rest of the strip it looks like plastic push in plugs that go through the bumper.
do i just take the nuts off each end and the pull on the strip to remove, and just push the new strip on ?
want to make sure i know what im getting into before hand.
02-14-2012, 06:50 PM #2
Have a look here... Looks like 2 nuts and some push clips. Hope this helps some...
Last edited by jake's silverado; 02-14-2012 at 06:59 PM.Finally a signature and Avatar! I also posted some pics in the Gallery.
2011 2500HD Crew Cab 4X4 Z71 6Liter.
2011 Outback Travel Trailer 260FL
So Happy to not be on the edge of GVWR Over Load!!
By alw in forum General Chevy & GM Tech QuestionsReplies: 1Last: 01-24-2012, 09:01 AM
By GSXR in forum General Chevy & GM Tech QuestionsReplies: 2Last: 10-09-2011, 07:29 PM
By mjs84 in forum General Chevy & GM Tech QuestionsReplies: 5Last: 01-04-2011, 01:51 PM
By SilverSteve in forum Chevy Truck AccessoriesReplies: 8Last: 08-05-2010, 02:44 PM
By chiefholdem in forum Chevy Truck AccessoriesReplies: 6Last: 02-04-2009, 08:01 AM
Tags for this Thread