Results 1 to 1 of 1
Thread: 4.3L rebuild Info?
02-21-2012, 02:44 PM #1
- Join Date
- Feb 2012
4.3L rebuild Info?
Doing a very basic rebuild on a 98' GM 4.3L, was wondering if anyone could share some tech info from there manual, looking for main and rod bearing torque procedure, and head and intake torque procedure. Would sure like to not buy a manual and save some beer money.
98' olds bravada/blazer, bought cheap, not running, sitting for few years, rusted fuel tank, failed fuel pump, engine oil mud, lifter failure, pushrod damaged, misfire code, runs rough, failed fuel pressure regulator, 105,000 miles, Pulled engine, swamp out muck, clean and inspect, reusing all but lifter/pushrod/gaskets, on the right track?
By ahobson1 in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 06-24-2010, 10:15 PM
By Big_Ben in forum The Coffee Shop ~ Chit ChatReplies: 9Last Post: 03-28-2010, 01:15 AM
By 2COR517 in forum Chevy C/K Truck ForumReplies: 10Last Post: 06-25-2009, 10:42 PM
By Big Steu II in forum GM PowertrainReplies: 4Last Post: 04-08-2009, 08:46 PM
By Kibb's 96 Chev in forum Performance & FuelReplies: 1Last Post: 11-20-2007, 07:15 PM