Results 1 to 9 of 9
Thread: Dual exhaust decibels!
02-23-2012, 09:35 AM #1
- Join Date
- Jan 2012
Dual exhaust decibels!
I just installed a MBRP pro series cat-back dual exhaust system on my 2010 Silverado. To be honest, I'm a little disappointed in the loudness and sound of it. I was hoping for more. I wanted an exhaust that was really loud, with a nice, deep tone. This one just doesn't do it for me. Is there anything I can do to make my truck louder?
And, I have heard differ opinions on this, but do larger or smaller diameter exhaust pipes make the system louder? I have heard people say each way makes it louder, which is it?!
The exhaust system I have uses a 3 inch pipe from the cat to the muffler, then after the muffler splits into dual 2 1/2 inch pipes out the rear of the truck to the tips. Any help or suggestions would be awesome!!
02-23-2012, 10:17 AM #2
flowmaster super 10..it's a one chamber muffler, that has a super deep throaty sound. I had one on my white 2011 silverado. all stock exhaust except for the muffler. go to youtube and search for xxxj70xxx. look under my videos and check it out. now understand, i recorded it with my ipod..so the video doesnt do it justice. but if i goose it in parking lots..car alrms chirp! lol
also, one of my videos found it's way to this site. it's actually the girl with the big "Lungs" on the main page under media
2011 Silverado "Black Widow Edition"
35" Mickey Thompson Baja ATZ's
20" American Racing Rims With -24 offset
Recon Smoked Led Tail and 3rd Brake Lights
MCX Conversion Package.....
Custom Dual Exhaust
Custom Chrome Gauges With Red Back-Lighting
Black Widow Badges
Back-up Camera System
Full Length Nerf bars
Pioneer Head Unit
Custom Sub Box With Two Competition 10" JBL's
Rockford Fosgate 1000w Prime Amp
02-23-2012, 12:40 PM #3
Idk if that kit removed the resonator but if it didn't then take that out, but I run the stock exhaust pipe to a 1 into 2 10 series and it's loud enough2009 chevy 1500 z71 4x4
2.5 ccm level,2.5 inch rear blocks 305/60/18 coopers stt,Debadged,10 series flow w/dual exit in front or right rear tire, KN CAI, diablo InTune, 18% tint all the way around ,spec-d euro headlights with black housings,winjet smoke LED tail lights,putco LED third brake light smoked, fab fours front bumper with 10k warn winch, RK sports ram air hood
1965 c10 swb, zz4 350 with the hot cam and fast burn heads and a 780 Holley on top, richmond super street 5 speed,restorod
02-26-2012, 02:26 AM #4
ive come to find that my years of tinkerin on engines that headers make a huge difference. the mbrp exhaust prolly would sound sick if it had non restrictive headers and no cats. where i live you can run open headers and no one would care.headers for my truck gotta wait. to expensive.
02-26-2012, 02:36 AM #5
I do agree for sound headers can make a truck sound a lot better,I love no emission I don't own a single vehicle that could pass emissions, sorry earth
02-26-2012, 03:27 PM #6
02-27-2012, 02:22 PM #7
My experience is that headers make for a much nicer tone, however it quiets the truck down. Bear in mind that I was running straight pipes and added the headers after, on 2 separate occasions. My 2 cents.Andy
05 Silverado 1500 Z71 Until 6/5/12
Straight Pipe Dual Exhaust
LED Third Brake Light
Ram Air Cowl Induction Hood
Edelbrock Shorty Headers
02-29-2012, 09:48 PM #8
- Join Date
- Jan 2012
@ahmitchell1 - what exactly is the resonator? I removed everything behind the cat. The clamp that held the pipe to the cat was retained, but the pipe was replaced with the mbrp system.
@sstoner911 - No, this is the 5.3 gas engine.
After hearing it for a while now, its prett loud. It could be a little louder when it is idling, but when you hit the gas it gets much much louder. I have only heard it from inside the cab, but from what people have said its pretty loud if you are outside the truck. I'll have to give it a little time, maybe i'll learn to like it more, or maybe I'll decide to do some more with it to make it deafening lol
03-01-2012, 10:51 AM #9
The resonator is where that clamp is the cats on our truck are more towards the headers on the y pipe.
By 89steveo50 in forum Performance & FuelReplies: 5Last Post: 09-26-2011, 08:59 PM
By jrsmith14 in forum Chevy Truck TalkReplies: 5Last Post: 09-02-2011, 04:55 PM
By RyGuyGMC in forum Chevy Silverado Forum (GMC Sierra)Replies: 2Last Post: 03-16-2010, 10:39 AM
By gmagilla in forum General Chevy & GM Tech QuestionsReplies: 7Last Post: 11-17-2009, 07:51 AM
By Jordan in forum Performance & FuelReplies: 3Last Post: 06-25-2008, 11:27 AM