Results 1 to 9 of 9
Thread: New Gauge Face?
03-02-2012, 09:43 PM #1
New Gauge Face?
Im looking at trying to get a new gauge face soon but i dont know of any brands. any input would really help me. this will be happening prolly after my next deployment. which is this summer.
2010 Silverado Z71
"Fueled by Haters"
TCS front box 7"-9" set at 8.5" | FTS coilovers(blue coil) with resis and FTS shocks with resis| 20" Fuel Off-Road Revolver Rims | 35x12.50 Nitto Trail Grapplers | Halo Projector Head Lights by Recon- Black | Led Taillights by Recon- Smoked | Dumped Straight pipe | Volant CAI | Ranch Hand Front Bumper | DiabloSport Trinity Programmer | Tow Mirrors with Turn Signal | Cervinis Ram-Air hood | 4.56 USA gears with tru trac locker | Longshot Lighting 6000k 55w low beam and 6000k 35w fogs HIDs | 7" lift leaf spring | Blue TCS traction bars
Future Mods: Long tube headers | Custom tune | Cam | Stall Converter
03-28-2012, 01:06 AM #2
go to autoanything.com and stylintrucks.com. They both carry similar brands, but for whatever reason they offer difference faces. Or you could go straight to nuimage.com and see if they have anything you like. This is one of the less expensive things I'm planning to do in the near future as well.
To Be Completed (Eventually):
6" BDS Suspension lift | KingShocks Front and Rear Coil Overs | 4.56 Gears | 35" A/Ts (TBD) | Cervinis 07-12 Silverado Ram Air Hood | Fab Fours Front Winch Bumper (CS07-H2051-1) | Fab Fours Full Size Rear Bumper (CS07-W1850-1) | RX-2 Series Main Grille (Black) | Line-x Bed and wheel wells | Skid Plates | Rizor Automated Tonneau Cover | Custom Bed Insert | RBP RX-3 Series Nerf Bars | Kenwood Excelon DNX9990HD | JL Audio Stealthbox (2x500RMS) | JL Audio HD 1200/1 Class D Mono Amp | JL Audio C5-653 Components (Front) | JL Audio C5-650 Components (Rear) | JL Audio Slash v2 300/4v2 Class A/B Amp
03-28-2012, 01:28 AM #3
rstparts.com is another one. they're pretty expensive but i def like their gauge faces
"If you're not living life on the edge, You're taking up too much space"
"Truck Norris"- 2008 TX Edition Silverado
- McGaughy's 4/5 Drop Kit
- Apline Type R 10s & Amp
- Pioneer 6 Disc Touchscreen Deck
- Nightmare Breed Motorsports custom tune
- Custom 3" dual exhaust through x-pipe dumped at axle
- Airaid CAI
- Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
"Kristine" - 1991 Nissan 240sx
- Cut to pieces, LS build pending
03-28-2012, 01:50 AM #4
I had not come across those before Rado. I really like those as well. They're nice. And yeah, they're not cheap, but the nuimage ones approach the same price level on some of them. I think I might like the ones you posted better than what I was looking at.
03-28-2012, 01:57 AM #5
03-31-2012, 05:21 PM #6
Check these RBP gauges out. A little pricey but pretty cool looking, IMO. I remember looking into them when I had my '09 Sierra. I decided not to change out my gauge faces because it came with some pretty cool ones that had Z71 on them. Since I took my Z71 sticker off I wanted to leave some remembrance of what it was. I'd be interested in seeing what you come up with and learn about other options that exist.
03-31-2012, 09:45 PM #7
Now MY wheels are turning on thinking about replacing my gauges.. lol
This site has some good lookin ones and they seem pretty legit as well. Pricey... but I like some that they offer.
04-01-2012, 03:38 AM #8
I've seen those RBP gauges a couple of times and considered it mainly because I'm looking at an RBP Grille so it'd be kind of cool to match them up. However, I'll get the grille first in case I change my mind later.
04-01-2012, 05:24 AM #9
Those usspeedo ones look sweet. I am looking at getting the aqua ones for my truck.
By donyms in forum Chevy Silverado Forum (GMC Sierra)Replies: 2Last: 02-26-2012, 11:32 PM
By reggiecab2000 in forum Performance & FuelReplies: 29Last: 08-29-2011, 09:08 PM
By rick88122 in forum General Chevy & GM Tech QuestionsReplies: 0Last: 01-16-2010, 08:44 PM
By jimmischeff in forum General Chevy & GM Tech QuestionsReplies: 6Last: 11-27-2009, 09:48 AM
By fatman in forum Member IntroductionsReplies: 8Last: 02-06-2008, 06:38 PM
Tags for this Thread