Results 1 to 6 of 6
Thread: Switch over to bags?
03-02-2012, 10:21 PM #1
Switch over to bags?
Ok ive got my 95 C1500 dropped 4,6 with belltech kit but been thinking about switching over to bags. Any suggestions on good kits, cheap deals, or things to stay away from?
Thanks for any help of advise!
03-02-2012, 11:21 PM #2
- Join Date
- Mar 2007
- Grand Prairie, Texas
- Blog Entries
Are you planning on going lower or do you just want to build the system with bags?
BellTech lowering kits are prety good and when done right the ride can be almost as good as stock.
Bags offer a good ride to once you get them dialed in and learn the pressures to run.
Personaly if I had the truck lowered with a BellTech kit I probably wouldnt change it unless your looking for some height adjustability which is really the only advantage you'll get with bags.
03-03-2012, 08:02 AM #3
Well Im not in to body drop or dragging but i would like to tuck my 20s & everybody says there is no sub for riding on air! Just not excited about dropping $4Gs on it haha
03-12-2012, 05:40 AM #4
KP components is the easiest/quickest way to bag a truck imo. Everything is bolt on. It's somewhat expensive though. If you have the right bags/shocks they'll ride better then stock.
03-16-2012, 03:29 PM #5
if you do endup doing bags there will be no need for shocks because your bags become your shocks.
03-17-2012, 07:52 AM #6
No, you at least need to have shocks on the rear. It is extremely unsafe to not have shocks.
By jgmanchester in forum Chevy Truck AccessoriesReplies: 1Last Post: 02-05-2011, 12:34 AM
By Patman in forum Chevy Silverado Forum (GMC Sierra)Replies: 3Last Post: 11-13-2010, 01:56 PM
By dexterguy in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 06-21-2010, 10:16 AM
By lsutoms in forum Chevy Truck AccessoriesReplies: 20Last Post: 12-03-2009, 11:00 AM