Results 1 to 4 of 4
Thread: ECM removal in 1995 C1500
03-03-2012, 10:56 AM #1
ECM removal in 1995 C1500
I have a 1995 C1500 with the 4.3l engine. I ordered a stage 1 chip for it and I will need to remove the ECM to install it. Are those hard to do? I belive its behind the glove box. Any tips or advice will help. Thanks all!1995 C1500 4.3L 2WD. JET TBI Spacer, JET stage 1 chip, 10mm Taylor custom wires, Pulstar Iridium Pulse Plugs.
260k miles and still going strong...
03-03-2012, 02:51 PM #2
- Join Date
- Jan 2012
- Sault Ste. Marie, Ontario Canada
You got it... behind the glove box. Its straight forward. Disconnect POS terminal on battery. Remove OEM chip, install new chip, reconnect battery. GO!My lug nuts require more torque than your Honda makes.
03-07-2012, 04:15 PM #3
Actually, you should remove the NEGATIVE battery cable first. For that matter, you don't have to remove any cable to replace the ECM as long as the ignition is "OFF" while you do it.
Good Luck and God BlessRemember that if you're not part of the solution, then you're part of the problem!
03-11-2012, 04:40 PM #4
Chip will probably give you trouble......all i have to say about that.
By Crispyt in forum General Chevy & GM Tech QuestionsReplies: 5Last Post: 06-01-2012, 07:47 AM
By seph in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 12-26-2011, 02:31 PM
By Anv1319 in forum General Chevy & GM Tech QuestionsReplies: 1Last Post: 04-11-2010, 08:38 PM
By 95WT in forum Chevy C/K Truck ForumReplies: 1Last Post: 07-27-2009, 04:03 PM
By zieg72 in forum General ClassifiedsReplies: 2Last Post: 04-05-2009, 11:07 PM