Results 1 to 3 of 3
03-04-2012, 02:30 PM #1
Left Rear Door Latch Just Quit Working
I just returned from Home Depot with a 4x8 sheet of plywood, but now my 95 suburban is holding it hostage. The left rear door latch quit working, and won't open. The right door opens fine, but the handle in the door jam of the left door isn't connected to the locking mechanism. It just flops around. Any ideas how to unlatch the door? Do you have to drill those rivets out around the latch? Help! This is not how I expected to spend my Sunday.
---------- Post added at 02:30 PM ---------- Previous post was at 01:23 PM ----------
ok, I got the answer from an internet search. The carpeted lower panel will come off with the door shut. Start from the latch side of the door and pop the carpeted panel off with a "interior panel removal" tool (You know, the tool with the divided blade that goes around the plastic posts that snap the panel to the door frame). You may be able to use a large flat blade screwdriver if you are careful.
Once you have the panel off you can reach the mechanism and unlatch it.'95 Chevy Suburban 4x4 LS 5.7L
03-09-2012, 10:21 AM #2
The door handles and mechanisms are a weak point on these trucks. I've seen countless broken units. Luckily, they are easy to fix.I like you.
03-16-2012, 09:12 PM #3
You need a new handle or the rod connected to it got loose, second is unlikely, I just replaced my left side barn door handle a few months ago. They are made of the cheapest white metal and brake or crack making the mechanism not work. Try pushing in on the driver’s door, the one that is not opening before you pull the handle. Push the door with your left hand and then pull the handle. If that works it will be a lot easier to take the door pad off to replace the door handle if that is what it needs.
Technology is great, when it Works,
And one Big Pain in the Ass When it Doesn’t.
Detroit Iron Rules, All the Rest are Just Toys.
94 GMC Burban, 5.7L (350), 4X4, Auto
86 GMC Burban, 350, 2 WD, Auto
79 GMC pickup plow truck, 400, Full time 4X4, Auto
86 Pontiac Fiero SE, 2.8L, Auto, only mid engine American car
See a Pattern yet?
15 year GM assembly line worker.
By jwl126 in forum Chevy C/K Truck ForumReplies: 1Last Post: 11-03-2011, 09:11 PM
By Ganey_1 in forum Audio, Video & Gadget TechReplies: 3Last Post: 01-16-2011, 03:47 PM
By MoDaddy in forum General Chevy & GM Tech QuestionsReplies: 0Last Post: 07-20-2009, 02:46 PM
By buddy4338 in forum Chevy Silverado Forum (GMC Sierra)Replies: 0Last Post: 07-01-2009, 07:10 AM
By Steve in forum Chevy Parts eBayReplies: 0Last Post: 06-16-2009, 11:00 AM