GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Page 1 of 2 12 Last Post byLast Post by
Results 1 to 10 of 12

Thread: is this normal

Hybrid View

  1. #1

    Default is this normal

    Notice the bed to cab relationship.its not like that normally why with a load does it do that?

    Click image for larger version. 

Name:	ForumRunner_20120309_194620.jpg 
Views:	54 
Size:	68.3 KB 
ID:	35908

  2. #2
    Master Mechanic
    AMac's Avatar
    Join Date
    Feb 2012
    Location
    New England
    Posts
    944

    Default

    I'm not sure I understand your question, can you explain a little more as to what you think the problem is?




  3. #3

    Default

    Yeah. Normally the truck stays right side up!

    I am not so sure what the question is either. Is there frame flex?
    "It went together didn't it? Well then there has to be a way to take it apart!" - Me.

    Check out my image gallery HERE.



    "The true measure of a man is how he treats someone who can do him absolutely no good." ~Samuel Johnson (1709-1784)

  4. #4

    Default

    Yea I'm using my phone a nexus s and for some odd reason when posting a picture it always flips it upside down. The concern is the bed to cab relationship. It looks like its bending slightly between the bed and cab. I notice a lot of chevy look like this mine only does when there is a substantial weight in the back.

  5. #5

    Default

    With the picture size, it doesn't look like it's off much. Have you measured from the cab to the bed at the top, and then the bottom to see if it's off at all?

    At least I think this is what you're talking about.


    2008 Ext. Cab Silverado LT1 5.3L 2WD
    APC LED Tail Lights | Spec D Smoked Third LED Brake Light | aFe Magnum Force Stage 2 CAI

  6. #6

    Default

    How much weight at you hauling? Yes. The frame will flex under loads. What shape is the farme in? Is it rusty?

  7. #7

    Default

    Frame is in very good shape and about 2000 lbs give or take a little

  8. #8

    Default

    You should be fine. I have hauled enough stuff on my chevy trucks to compress the suspension to the bump stops more than a few times! A little frame flex won't hurt anything.

  9. #9

    Default

    How much weight does it take to compress the suspension to the bump stops. Also I don't think I ever had a truck bend like that its not real bad but it is noticeable

  10. #10

    Default

    I am not sure how much weight it takes to go to the bump stops. We were taking an analog TV transmitter out of a TV station and had to disassemble it completely and haul it away in loads. TV transmitters are HEAVY! This transmitter was about 8' wide, 7' tall and 2 1/2' deep. The tube in the transmitter had to be removed with an engine hoist. Ya need a REAL truck if'n yer gonna haul TV transmitters! LOL! Don't bother to bring a Ford!

    Is this your first longbed? That might be why.

Page 1 of 2 12 Last Post byLast Post by

Similar Threads

  1. Engine Temp, what's normal
    By KAHruzer in forum Chevy C/K Truck Forum
    Replies: 1
    Last: 08-10-2010, 08:25 AM
  2. Do I have an electrical problem or normal?
    By hihoslva in forum General Chevy & GM Tech Questions
    Replies: 9
    Last: 08-10-2009, 06:42 AM
  3. '99 Silverado - Does this look normal? Pic Inside.
    By hack_tc in forum GM Powertrain
    Replies: 15
    Last: 12-27-2008, 08:55 PM
  4. 'Burban gurgles - that's normal, right?
    By Springthing in forum General Chevy & GM Tech Questions
    Replies: 12
    Last: 09-18-2008, 01:52 AM
  5. normal operating temp.
    By chevymarine in forum Chevy Trailblazer Forum (GMC Envoy)
    Replies: 4
    Last: 07-18-2006, 11:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •