GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 4 of 4
  1. #1

    Default Front Right Caliper on Equinox Stuck

    My front right caliper on an Equinox is stuck. I drive it and once I get done I can smell the brakes. It gets so hot that the wheel gets hot also. I have taken it apart and cleaned it and it's still sticking. Can anyone think of what may cause this to happen?

  2. #2

    Default

    what year/trim is it?

    ---------- Post added at 12:45 AM ---------- Previous post was at 12:35 AM ----------

    If i had a guess, they use a single piston floating style caliper on it. Have you taken the slide pins out, removed the rubber covers (assuming they have them), and checked the pins for any kind of abnormal wear or notching? Also, grease the piss out of them while they are off the car. I've had the same issue on a different car and i took a strip of emory cloth, hit them lightly and greased em up and it solved my issue.

    "If you're not living life on the edge, You're taking up too much space"

    "Truck Norris"
    - 2008 TX Edition Silverado
    - McGaughy's 4/5 Drop Kit
    - Apline Type R 10s & Amp
    - Pioneer 6 Disc Touchscreen Deck
    - Nightmare Breed Motorsports custom tune
    - Custom 3" dual exhaust through x-pipe dumped at axle
    - Airaid CAI
    - Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
    "Kristine" - 1991 Nissan 240sx
    - Cut to pieces, LS build pending

  3. #3

    Default

    I totally pulled it apart, hit it with emory cloth and greased it before I put the pistons back in. The pedal is extremely stiff to push, takes forever to come back up, I bleed them and it's still doing it. When you put it in netrual on a hill it doesn't roll at all. It's like the brakes are dragging. I'm thinking a bad master cylinder, but I'm not sure.

  4. #4
    Sr. Engineer
    Join Date
    Dec 2011
    Location
    11-22-boogie woogie avenue
    Posts
    308

    Default

    Need a new caliper ..or rubber brake line has collapsed inside not letting pressure back to ms.
    If it was ms/master cylinder both would be sticking.

Similar Threads

  1. Loose Brake Caliper
    By Mike Hill in forum Lifted & Offroad Suspension
    Replies: 0
    Last Post: 11-29-2011, 04:28 PM
  2. Bad brake caliper?
    By Crispyt in forum Lifted & Offroad Suspension
    Replies: 1
    Last Post: 05-17-2011, 11:56 AM
  3. bad caliper?
    By TheUnit in forum Lifted & Offroad Suspension
    Replies: 3
    Last Post: 02-14-2011, 09:34 AM
  4. 09 Equinox - Noise Heard From Front End?
    By Steve19 in forum General Chevy & GM Tech Questions
    Replies: 0
    Last Post: 08-19-2009, 03:18 PM
  5. NNBS 07-08 Red Caliper Paint How to!
    By WaldoAZ in forum Chevy Silverado Forum (GMC Sierra)
    Replies: 2
    Last Post: 07-19-2008, 09:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •