Results 1 to 6 of 6
03-10-2012, 10:52 PM #1
Color-matching the black plastic inserts of the grille??
Ever since I dropped the truck, my mind has been going 90-Nothin about things I can do to help the appearance of Truck.
Was thinking of color-matching the black plastic grille inserts on the front as well as the bowties, removing all factory badges (Except the bowties) and trying to find somewhere that sells a lettering resembling that of the stock "SILVERADO" so i can custom badge it. Also, was thinking about replacing the 08 side moldings with those from an 09-10 body style with the chrome strip along the top, as I dearly miss how the steps married the chrome across the truck from front bumper to rear.
Also debating some white SS emblems outlined in a dark blue, as I feel it would go with the "theme" of my truck (the interior is tan and i have blue LED strips under the dash and under the front seats and in the amp space for the subs hooked to my dimmer switch so they dim with every other light inside at night)
ALWAYS open to suggestions and IMO's
"If you're not living life on the edge, You're taking up too much space"
"Truck Norris"- 2008 TX Edition Silverado
- McGaughy's 4/5 Drop Kit
- Apline Type R 10s & Amp
- Pioneer 6 Disc Touchscreen Deck
- Nightmare Breed Motorsports custom tune
- Custom 3" dual exhaust through x-pipe dumped at axle
- Airaid CAI
- Badges and molding removed, roll pan, Truxedo roll-up cover (compliments of GMTC!), 3pc billet grille, factory fogs upgrade
"Kristine" - 1991 Nissan 240sx
- Cut to pieces, LS build pending
03-12-2012, 01:56 AM #2
03-12-2012, 02:28 AM #3
I think doing the grill insert would look sick man!Adam
11 Silverado Summit White Ext. Cab 5.3L Z71 9k miles
RC leveling kit
Jason fiberglass tonneau cover
Superchips 91 octane tune
Front air dam removed
6,000k lowbeams 6,000k fogs
color match bowties
color match mudflaps
20% tint all the way around
20% tinted 6in sunshade
Nitto terra grappler 275/70r17 (winter setup)
Chevy 22s with Bridgestone Alenza 285/45r22 (summer setup)
Kenwood DNX6180 indash
03-12-2012, 11:19 PM #4
Get someone to photo shop it and then decide if it works for you. Good Luck2010 Chevy Silverado Z71 ext cab.4x4
72 Monte Carlo 350-415 hp- sold (June 2011) to pay medical bills
79 Impala 350 4bbl 375 hp- sold (June 2011)to pay medical bills
"If He asks you to go a mile go two"
03-13-2012, 06:03 PM #5
- Join Date
- Feb 2011
- Western Massachusetts
- Blog Entries
Whipped this up to give you an idea of what it may look like.
Another thing you could do would be to put some white tape on it and cut it out. I have been debating on doing the same plastic insert on mine either red or black, I got some red tape and cut it out. Seemed to work really well as far as seeing what it would look like. (Mid way through doing the tape)
03-13-2012, 10:21 PM #6
Wow.. thanks for the help with that.
according to AMac.. I'm apparently as bad as a woman when it comes to making up my mind when it comes to Truck.
I think I am goin to go with the full white w/chrome inserts grille from GM, and do a white bowtie overlay.
Still looking for input as far as the SS emblems and finding something close to OEM lettering though if anyone has anything to that effect! thanks
By Rockstarrchevy81 in forum Chevy Truck AccessoriesReplies: 0Last: 06-06-2011, 06:46 PM
By Michael Johnson in forum Lifted & Offroad SuspensionReplies: 3Last: 03-01-2011, 04:43 PM
By 99'HEARTBEAT in forum Photo & Video GalleryReplies: 12Last: 05-01-2010, 03:09 PM
By 2wheelmudder in forum Chevy C/K Truck ForumReplies: 4Last: 08-31-2009, 11:36 AM
By AllBlkdOut07 in forum Chevy Truck AccessoriesReplies: 7Last: 07-02-2008, 03:10 PM
Tags for this Thread