GM Truck Club
THE PREMIER CHEVY TRUCK & SUV FORUM
Founded in 2004 ~ We're the #1 Chevy Truck & SUV Forum.
Silverado & Sierra | Tahoe & Yukon | Suburban & Yukon XL | SUV & CROSSOVER
Results 1 to 6 of 6
  1. #1

    Default Need to figure out Diff Specs

    I cant seem to find the information I want so If we get enough can sticky it... ;)


    Anyways, I got
    2001 Chevy Tahoe - Base 4.8L
    Transmission - 4L60-E
    Transfer Case - NP246 - AutoTrac

    Now I cant figure out for my Project.....
    I believe it is 10.5 Inch Rear Solid Axle right? So now I trying to figure out the ring gear so I can make a match for my new setup to match that ring gear so I get best from my box for On and Off Road use Correct?
    Anyways if someone has the info that would be great. And perhaps the Codes for Identification would be marvelous.

    - Kyle (The Shop Customs) 604-726-2065

    ---------- Post added at 06:29 PM ---------- Previous post was at 06:18 PM ----------

    Not sure if this is right Axle Ratio - Rear: 3.73?
    And sees when I go to replacement Axles that its 3.42... So very confused, starting to think I should see if dealership on Vin Check can give me the Ratio, Ring Gear ect... I need to make match front to back for best results...

    Also, what kind of Independent Differential Box would work as a general Replacement for Stock Front one?
    I was thinking of the Corvette Box but I don't think it would be big enough to house the stock ring gear size either.. :(

  2. #2

    Default

    There should be sticker in the glove box or door jamb with codes for paint color, diff etc.... something like these..

    GQ1 -- AXLE REAR, STD RATIO
    GT4 -- AXLE REAR, 3.73 RATIO
    GT5 -- AXLE REAR, 4.10 RATIO
    GU4 -- AXLE REAR, 3.08 RATIO
    GU5 -- AXLE REAR, 3.23 RATIO
    GU6 -- AXLE REAR, 3.42 RATIO
    G80 -- AXLE REAR, LIMITED SLIP (POSITRACTION)


    GMTruckClub members receive discounts off our normal rates! PM me for quotes! Check out our Films gallery - updated with over 200 Hydro Dip films!

    If it can be painted - it can be Hydro Dipped!

    Get the Gorilla!

    gorilladip.com

    sales@gorilladip.com

  3. #3
    Sr. Apprentice LURCH's Avatar
    Join Date
    Aug 2011
    Location
    North East Tn.
    Posts
    72

    Default

    It should be an 8.5" 10 bolt rear housing, I don't think they make a 10.5".

  4. #4

  5. #5

    Default

    You have the 10 bolt semi-float axle under the rear. The 10.5" 14-bolt was only put under 3/4 ton and 1-ton vehicles.
    Christopher

    1991 Chevy Suburban 1/2 ton 2WD w/ chevy SBC 350-3/4 ton drivetrain upgrade w/4.10 gears 200K miles
    2005 Saturn ION-2 Stock 265K miles
    1982 Bronco, 1993 Bronco (sold), 1971 M35A2 Deuce and a Half



    There are 10 kinds of people, those who understand binary, and those who dont...

    Remember kids, the only difference between screwing around and science is writing it down- Adam Savage

  6. #6

    Default

    Okay so I found it... Thank you for the codes..
    I got the GT4 Code, which be the 3.73 thank you...

    So as long as I make sure the front and rear are at 3.73...
    As for the other dimensions 8.5" 10 bolt rear housing, If I swap to Solid Design I must use those same Settings.
    Thank you Boys Very well Appreciated, and I will let you know how the design turns out..

    This project is not a for sure go so don't be all asking for photos.. I will post when I have time and start.. ;)
    First comes Engineering.. LOL

    Side not this Project is not for Ultimate Rock Crawling my Truck but rather design a slightly better but stronger off-road setup that does not destroy my regular driving but does allow me to do bit better off roadin.. Thanks again guys...

Similar Threads

  1. Air conditioning can't figure it out
    By Buffaloslobber in forum General Chevy & GM Tech Questions
    Replies: 3
    Last Post: 05-10-2011, 10:38 AM
  2. Can you figure this game out???
    By mfleetwood in forum Games Forum
    Replies: 2
    Last Post: 12-27-2010, 02:51 AM
  3. cant figure out the problem with my 87 :(
    By 77gmc in forum General Chevy & GM Tech Questions
    Replies: 12
    Last Post: 12-02-2010, 09:57 PM
  4. New and trying to figure it all out??
    By RunningOnEmpty in forum Member Introductions
    Replies: 10
    Last Post: 11-29-2009, 01:37 PM
  5. Help! Mechanics can't figure out AC's odd behavior
    By joelbra in forum General Chevy & GM Tech Questions
    Replies: 7
    Last Post: 09-29-2009, 10:40 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •