Results 1 to 10 of 10
03-14-2012, 07:36 AM #1
What are the best gears for 35's/37's?
Currently I have 35in Toyo OC MT tires on my Silverado 1500, but after I install my body lift and these tires wear out, I may get 37in tires. My question is what gears will work best for both, or is that even possible? I have been told you can run 4.56 comfortably on both but can anyone confirm that?
03-14-2012, 09:36 AM #2
This gear ratio chart should provide you some guidance. You'll lose a little bit of power but will get better mileage.
Mike (Denver, CO) - 2008 Sierra 1500 Z71 SLE 5.3L 4WD
SUSPENSION: Rancho 4" Suspension Lift; Rancho RS9000XL Shocks; Rancho Skid Plates; Rancho MyRide Wireless Shock Controller;
TIRES: BFG All Terrain KO 315/70/17
DRIVE TRAIN: 4.56 Gears; Detroit TrueTrac Differential; True Cool 40k Transmission Cooler
PERFORMANCE: DiableSport Predator Tuner; Custom Tuned by Diablew; Magnaflow Exhaust; AFE Cold Air Intake
ELECTRONICS: Kenwood DNX6180 Touchscreen; Subthump box w/10" Kicker; Driver Information Center (DIC); Rear View Camera
ACCESSORIES: Westin Brush/Grill Gaurd; Westin Nerf Bars; Truxedo Tonneau; 20% Tint; Tow Mirrors w/Heat & Signals
03-14-2012, 09:54 AM #3
@mfleetwood is spot-on. Staying with 4.56's when you moved from 35's to 37's would result in better highway fuel economy on the 37's ... at the expense of power you had when on the 35's. Staying within the green band on the chart keeps you close to factory/OEM capabilities. You might consider 4.88's for your needs ... just realize that highway economy gets worse as you shorten the gears.
03-15-2012, 04:28 AM #4
Thanks for the help, I forgot to mention that I will also be towing a small bass boat behind the truck.. will 4.56 still be good for both sizes or only 35's?
03-15-2012, 08:23 AM #5
I would do 4:88's same money better performance, so what you have to drive a little slower until you get the 37's. No brainer, just my 2 cents!!!!!!
03-15-2012, 08:35 AM #6
I'm not sure how heavy your boat/trailer are, if you have a lots of hills, or if you tow it often, but the 4:56s will be more sluggish.... but to what extent will depend on the variables. Or if your towing across flat land over a long distance, better mileage may be more appealing to you, so then the 4:56s will better suit those needs.
I'd suggest once you get the tires on, try towing with your current gears and if you are okay or can live with the performance, then no need to re-gear. IMO, it's not that big of a jump between those sizes and am not sure you will notice a significant enough difference for it to be worth the cost.
---------- Post added at 07:35 AM ---------- Previous post was at 07:32 AM ----------
Last edited by mfleetwood; 03-15-2012 at 08:37 AM.
03-15-2012, 09:59 AM #7
@Buckhunter11b, can you clarify?
03-15-2012, 11:34 AM #8
03-16-2012, 04:47 AM #9
Thanks for the replies. I currently have stock gears, I am planning on 4.56's . I would've installed then as soon as I got the tires but I was called up to deploy. I am getting gears when I return home, I just want to make the right decision. I don't have to go to 37's, my 35's are relatively new. Honestly, chances are I will stay with 35's add the body lift for additional clearance and get 4.56's. But I will be towing a boat over relatively flat terrain. Definitely no mountains in the Fort Benning, GA area. I really appreciate the help!
03-16-2012, 10:46 AM #10
4.56's are probably the right answer for you, then. (Mine go in next Thursday!)
By Winchester in forum Member IntroductionsReplies: 3Last: 11-27-2010, 11:35 PM
By JTx9 in forum Performance & FuelReplies: 2Last: 11-03-2010, 09:00 PM
By jjjg_02 in forum GM PowertrainReplies: 2Last: 12-25-2009, 10:51 PM
By hutch_pt in forum GM PowertrainReplies: 6Last: 05-17-2008, 08:14 PM
By phoebeisis in forum GM PowertrainReplies: 6Last: 12-14-2007, 11:12 AM
Tags for this Thread